SPONSORS
2024 ICRBE EXPO |
Thread color suggestions - dark green/olive CTS blank
Posted by:
Peter Mulbjerg
(---.aalborg.dk)
Date: March 29, 2005 02:53AM
Hi,
just received a CTS Affinity blank in a gloss dark green/olive color. I tried a couple of handfulls of the thread colors I had laying about but none seemed right so I would appreciate your suggestions on this. Thanks Peter Edited 2 time(s). Last edit at 03/29/2005 03:36AM by Peter Mulbjerg. Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Bruce Wetzel
(---.nmci.navy.mil)
Date: March 29, 2005 06:38AM
I've always thought that green and gold, or green and copper looked good together. Bruce Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
David Smith
(---.direcpc.com)
Date: March 29, 2005 07:30AM
I had one of the dark green blanks and had the same dilemma. So I tried a slew of combinations and took it fishing. The one that seemed to fit the rod the best was a Deep Cobalt Blue with Silver Metallic trim in the middle of the wrap and in between the two legged guides. Guides were gunsmoke with dark rings. Second most attractive (I thought) was the Cobalt wraps with a Bright Kelly green trim middle of the wrap and between the two legs of the guides. Most commented on though was a copper wrap with gold metallic trims.
David Smith Neophyte builder / phorum lurker Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Spencer Phipps
(---.hsd1.wa.comcast.net)
Date: March 29, 2005 08:06AM
Angler's Workshop has a custom color thread, Evergreen # 807, that is a dark Hunter green. WL4AR807 would be the catalog number.
A dark brown with copper trim should also look nice I think. Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: March 29, 2005 09:55AM
How about Candy Apple Red without CP and copper trim bands? The CAR turns a dark burgundy without CP. Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Joe Hart
(---.ca-sanfranc0.sa.earthlink.net)
Date: March 29, 2005 11:46AM
Kind of off the subject of thread colors, but where did you get the CTS blank and how does it feel/look? I have been considering these but have yet to see one firsthand.
Thanks, J.M. Hart Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Pete Kornegay
(---.client.mchsi.com)
Date: March 29, 2005 11:55AM
I built a rod last year - green blank - used Gudebrod dark brown guide wraps with metallic copper trim wraps - looks pretty snazzy.
Pete Kornegay Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Peter Mulbjerg
(---.aalborg.dk)
Date: March 29, 2005 02:04PM
Thanks for all your suggestions - I'll give them all a try and see what I like best.
Joe, I got the CTS blank through the danish distributor UssingBech - special order since its an 11 foot 5 weight 4 piece. It's very well made and straight as an arrow - and because of a slight delay in delivery they send along a spare tip section. I have nothing similar to compare it to so I'd rather not get into how it feels. I think you can contact Mr. Meiser - he has had some dealings with CTS. Peter Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Keith Tymchuk
(198.237.218.---)
Date: March 29, 2005 03:27PM
Metallic copper......Wow.
Keith Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Anonymous User
(---.tnt1.broken-hill.au.da.uu.net)
Date: March 29, 2005 05:37PM
Garnet with no CP trimmed with metalic lime green. Did this a little while back and it was an excellent combo. Have also built the dark green CTS. Beautiful blanks! Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Joel Todd
(---.nas6.chicago4.il.us.da.qwest.net)
Date: March 29, 2005 06:15PM
Rust in nylon trimmed in Sunburst nylon-no cp Re: Thread color suggestions - dark green/olive CTS blank
Posted by:
Peter Mulbjerg
(---.aalborg.dk)
Date: March 30, 2005 12:57AM
Thanks to the last posters as well - interesting suggestions I think. Sorry, only registered users may post in this forum.
|