SPONSORS
2024 ICRBE EXPO |
Post Removed
Posted by:
brian
(---.tyndall.af.mil)
Date: March 07, 2005 10:19PM
Please read rules before posting. Edited 1 time(s). Last edit at 03/07/2005 10:50PM by Tom Kirkman. Re: Post Removed
Posted by:
brian armstrong
(---.tyndall.af.mil)
Date: March 07, 2005 10:54PM
OK...I am building a saltwater fishing rod and I just finished the underwraps. For the underwraps, I used a metallic blue size A . I will be using a size D thread for the overwrapping of the guidesl. Should I put finish on the underwraps before I start the guided or can I just add the finish in the end. finish?
Posted by:
brian armstrong
(---.tyndall.af.mil)
Date: March 07, 2005 10:55PM
OK...I am building a saltwater fishing rod and I just finished the underwraps. For the underwraps, I used a metallic blue size A . I will be using a size D thread for the overwrapping of the guidesl. Should I put finish on the underwraps before I start the guided or can I just add the finish in the end. Re: Post Removed
Posted by:
Randy Emerich
(---.sl.psu.edu)
Date: March 07, 2005 11:58PM
Brian, put some CP on the underwraps and that will hold the threads tight together.
Randy Re: finish?
Posted by:
Grant Darby
(---.sequimschools.wednet.edu)
Date: March 08, 2005 10:34AM
Sure, you can put finish on the underwraps, it will provide a good smooth surface for the guide wrap. Color preserver will work as well, but depending on how much tension you wrap with, there is always the chance that one of your guide wraps will "fall in between" the underwrap. Although, that's going to be less likley with D over A. Re: finish?
Posted by:
bill boettcher
(---.an1.nyc41.da.uu.net)
Date: March 08, 2005 11:52AM
Put permagloss over the underwraps. It dries fast and hard and has a good surface to wrap over Re: finish?
Posted by:
bill boettcher
(---.an1.nyc41.da.uu.net)
Date: March 08, 2005 11:52AM
Put permagloss over the underwraps. It dries fast and hard and has a good surface to wrap over
Or even a varnish Sorry, only registered users may post in this forum.
|