OK, Lets try this again. I am looking for a 2 pc. fast action blank for plugging. The lure ranges should be 1/2 - 2 oz. Sorry if this is a repost from yesterday, I screwed up with my login.

Thanks

Tony

Tony,

St. Croix model 3C90MHF2 would be in the range of blank you might be looking for.

Rich Garbowski
Richard's Rod & Reel
807-486-0514

Welcome back. Take a look at salmon stealhead blanks and fly blanks can be used. Just change the line weight to lure weight Think you were looking for 9 footers?

Rich
looked for that blank and they have the 3C listed with the 3S blanks If you scroll to fast you miss it For what ever it's worth

Try our rod blank locator search engine at the URL below, we found 20 blanks fitting your needs in 5 seconds:

[shop.mudhole.com]

I just tried putting in 9' 2 piece fast action 1/2-2 oz lure weight and got nothing?? What am I doing wrong?

Found out what I was doing wrong Thanks

Hi Bill,

It is best to leave the search as simple as possible, then click on the column heading to sort by that value.

In this case, we would just type in 9 for length (leave off the ft sign ') and 2 for piece, click search then sort by lure weight. Because not all manufactures start with the same lure weight (1/2) in this case, you might miss a blank that has a 5/8 lure weight rating.

If you get to many results, add an additional constraint, like "fast" in the action selection and search again.

We hope this helps you and others use the rod blank search engine - we have found it extremely usefully tool.

Thanks,
Mud Hole Custom Tackle
[www.mudhole.com]
Phone 407-447-7637

Bill, what were you doing wrong. I haven't had any luck with my search.

Tony

try janns, the have a 2pc 9' that is rared from 1/2 to 3 oz. looks remarkably like a pacbay, $49

The All Star BESP1087-2 blank would also make you a nice rod.

Mike, I looked at Janns, but I couldn't find it. Can you give me a model number?

Tony

Checking out all the others in the meantime

I think he is talking about the 296-212 from Jann's.

i have one right here.

it does not show on their wsbsite but in the real world it is pg 52 part# 296-212

the tip is a little crooked(1/16") but i have seen worse on this type of rod. on the other hand the finish is very good.

Check out the Batson Enterprises website at www.batsonenterprises.com. We have a FEW blanks to choose from. If you have any questions please feel free to contact us.
Bill Batson
CEO
Batson Enterprises
Rainshadow/Forecast
wbatson@olypen.com
877-875-2381