SPONSORS
2024 ICRBE EXPO |
2 pc 9' Spinning Rod blank suggestion
Posted by:
Tony Politi
(---.dyn.optonline.net)
Date: December 19, 2004 08:08AM
OK, Lets try this again. I am looking for a 2 pc. fast action blank for plugging. The lure ranges should be 1/2 - 2 oz. Sorry if this is a repost from yesterday, I screwed up with my login.
Thanks Tony Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
Anonymous User
(---.tbaytel.net)
Date: December 19, 2004 08:17AM
Tony,
St. Croix model 3C90MHF2 would be in the range of blank you might be looking for. Rich Garbowski Richard's Rod & Reel 807-486-0514 Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
bill boettcher
(---.248.70.75.Dial1.Weehawken1.Level3.net)
Date: December 19, 2004 08:29AM
Welcome back. Take a look at salmon stealhead blanks and fly blanks can be used. Just change the line weight to lure weight Think you were looking for 9 footers? Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
bill boettcher
(---.248.70.75.Dial1.Weehawken1.Level3.net)
Date: December 19, 2004 08:48AM
Rich
looked for that blank and they have the 3C listed with the 3S blanks If you scroll to fast you miss it For what ever it's worth Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
Mud Hole Custom Tackle
(---.205.202.68.cfl.rr.com)
Date: December 19, 2004 09:35AM
Try our rod blank locator search engine at the URL below, we found 20 blanks fitting your needs in 5 seconds:
[shop.mudhole.com] Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
bill boettcher
(---.248.70.75.Dial1.Weehawken1.Level3.net)
Date: December 19, 2004 09:47AM
I just tried putting in 9' 2 piece fast action 1/2-2 oz lure weight and got nothing?? What am I doing wrong? Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
bill boettcher
(---.248.70.75.Dial1.Weehawken1.Level3.net)
Date: December 19, 2004 10:02AM
Found out what I was doing wrong Thanks Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
Mud Hole Custom Tackle
(---.205.202.68.cfl.rr.com)
Date: December 19, 2004 04:08PM
Hi Bill,
It is best to leave the search as simple as possible, then click on the column heading to sort by that value. In this case, we would just type in 9 for length (leave off the ft sign ') and 2 for piece, click search then sort by lure weight. Because not all manufactures start with the same lure weight (1/2) in this case, you might miss a blank that has a 5/8 lure weight rating. If you get to many results, add an additional constraint, like "fast" in the action selection and search again. We hope this helps you and others use the rod blank search engine - we have found it extremely usefully tool. Thanks, Mud Hole Custom Tackle [www.mudhole.com] Phone 407-447-7637 Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
tony politi
(---.dyn.optonline.net)
Date: December 19, 2004 04:09PM
Bill, what were you doing wrong. I haven't had any luck with my search.
Tony Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
mike taillefer
(---.dsl.snfc21.pacbell.net)
Date: December 19, 2004 05:13PM
try janns, the have a 2pc 9' that is rared from 1/2 to 3 oz. looks remarkably like a pacbay, $49 Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
Doug Cox
(---.neonova.net)
Date: December 19, 2004 05:28PM
The All Star BESP1087-2 blank would also make you a nice rod. Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
tony politi
(---.dyn.optonline.net)
Date: December 19, 2004 08:16PM
Mike, I looked at Janns, but I couldn't find it. Can you give me a model number?
Tony Checking out all the others in the meantime Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
Spencer Phippss
(---.client.comcast.net)
Date: December 19, 2004 08:28PM
I think he is talking about the 296-212 from Jann's. Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
mike taillefer
(---.dsl.snfc21.pacbell.net)
Date: December 20, 2004 04:26AM
i have one right here.
it does not show on their wsbsite but in the real world it is pg 52 part# 296-212 the tip is a little crooked(1/16") but i have seen worse on this type of rod. on the other hand the finish is very good. Re: 2 pc 9' Spinning Rod blank suggestion
Posted by:
Bill Batson
(---.olympus.net)
Date: December 20, 2004 04:42PM
Check out the Batson Enterprises website at www.batsonenterprises.com. We have a FEW blanks to choose from. If you have any questions please feel free to contact us.
Bill Batson CEO Batson Enterprises Rainshadow/Forecast wbatson@olypen.com 877-875-2381 Sorry, only registered users may post in this forum.
|