SPONSORS
2024 ICRBE EXPO |
Attaching Reel Seats/Handles
Posted by:
Jim Buraczewski
(69.211.94.---)
Date: December 16, 2004 12:44PM
Hi All,
I am about to attach my first reel seats/handles. I have been reading a number of posts on this board for background information. I sense a difference of opinion on how much epoxy to use. Some seem to indicate using only enough epoxy to make a solid joint between the Reel Seat and the arbors. Some seem to want to fill all of the gaps between the arbors completely with epoxy in order strenghen the assembly and prevent "squeking". Any thoughts would be appreciated before I start mixing. Thanks Again. P.S. I have posted a number of questions the past few weeks. The responses have been quick and very useful. I am thankful for the help. Re: Attaching Reel Seats/Handles
Posted by:
Tom Kirkman
(Moderator)
Date: December 16, 2004 02:10PM
Pouring or dumping in epoxy does absolutely nothing but add a little extra weight. You don't need to do that and it will not add any strength. Strive for a close fitting assembly and rely upon a thin glue line (the strongest) to adhere your parts. Read the online library article on how to prepare your surfaces before assembly.
................. Edited 1 time(s). Last edit at 12/16/2004 06:00PM by Tom Kirkman. Sorry, only registered users may post in this forum.
|