I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pages: Previous12
Current Page: 2 of 2
Re: New Site
Posted by: bill boettcher (---.250.144.92.Dial1.Weehawken1.Level3.net)
Date: December 01, 2004 10:18PM

Thank you Cindy. I think I may try to take some of my pictures on a lower setting, this way they will come up a little faster. Learning how to put this together is like learning new software and I am not literate when it comes to that.

Options: ReplyQuote
Re: New Site
Posted by: Mike Barkley (---.nap.wideopenwest.com)
Date: December 01, 2004 10:27PM

Bill,
I e-mailed you but it got kicked back "user unknown" so I'll just post it here Did you change e-mail addresses??

Looking pretty good! I would make your links into buttons though, instead of using the actual link address.

Take Cindy up on her offer of help. That's what she does. Check out her web site www.harlowgraphics.com She's good and has excellant prices!!

Mike barkley

Options: ReplyQuote
Re: New Site
Posted by: Pavel Novolokin (---.Moscow.dial.rol.ru)
Date: December 02, 2004 01:08AM

Bill,

I agree with Cindy about picture optimization... I took 3 photos from your main page and treated them in the way I usually do. They appeared to "weigh" at least 10 times less after optimization. If you want, you can take them here:
www.spin-review.ru/eng/SomeHandles.jpg
www.spin-review.ru/eng/GuidesandWraps.jpg
www.spin-review.ru/eng/SunsetFlorida.jpg

P.S. Just for any case... I wasn't about to "steal" your photos, just tried to help you a bit with them. If you want, I can do the same with all other on your site, it doesn't take much time


Pavel

Options: ReplyQuote
Re: New Site
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: December 02, 2004 01:35AM

Where else but here can a guy get so much help? We are blessed; thanks again, Tom, for this site where we gather...

Putter

Options: ReplyQuote
Re: New Site
Posted by: bill boettcher (---.250.147.64.Dial1.Weehawken1.Level3.net)
Date: December 02, 2004 11:36AM

Pavel; Not sure of the ones I will use? I was checking out my camera and found out it was set on almost the highest pixel setting. I usually let the cameria set itself. I reset it to the lowest " I guess that's good? " and will retake any for the site. This way they will load faster. Also got to take them outside, better light " it's cold out there! "
Your right Putter this place is great. If it goes down any time -- look for a lot of Addicts complaining
Got about 20 sites on my favorites -- so many choices

Options: ReplyQuote
Re: New Site
Posted by: Mike Barkley (---.nap.wideopenwest.com)
Date: December 02, 2004 11:48AM

Hi Bill,

What you might want to do is make a "thumbnail" of your pix and link it to the full sizes pix. That way it will load quickly.

Mike

Options: ReplyQuote
Re: New Site
Posted by: Cindy Harlow (---.ev1servers.net)
Date: December 05, 2004 10:30PM

Bill,

Mike has an idea there, the thumbnail thing. If you would like I can send you a snippet of coding that will do a "popup" style picture or even allow a larger photo to load on the same page out to the side of the thumbnail.

Cindy

Options: ReplyQuote
Re: New Site
Posted by: bill boettcher (---.an3.nyc41.da.uu.net)
Date: December 06, 2004 07:09AM

Cindy; I would not know what to do with that coding? I can build you a car, motorcycle, fishing rod, but am not great on computers. I just point and click.
I am finding that the lowest or even next to lowest settings on my camera work good. Then adjust a little.
That pop up sounds interesting. Thanks for all the help guys and gals

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
Webmaster