I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

epoxy and brushes
Posted by: Sergio Carpio (165.107.67.---)
Date: February 13, 2002 03:20PM

I'll try this one again.

In the past I have used disposable brushes to apply epoxy to my wraps with decent results. Yesterday I used a flex coat sable hair brush to apply flex coat epoxy to a couple of wraps and tiny bubbles resulted in the finish. I washed the brush in warm water prior to use and when I mixed the 2-part epoxy there were no visible bubbles. Is it common to get bubbles in epoxy finishes when using these types of brushes or does is sound like I am doing something wrong?
Thanks.

Options: ReplyQuote
Re: epoxy and brushes
Posted by: Tom Kirkman (---.dialsprint.net)
Date: February 13, 2002 04:30PM

The more brushing you do, the more bubbles seem to be created. Some people have dispensed with brushes altogether. Ralph O'Quinn has long believed a metal spatula is the best finish applicator. Tony Hill recently passed on his tip of cutting old credit cards into widths and then using them to apply finish. No bubbles are created this way.

...........

Options: ReplyQuote
Re: epoxy and brushes
Posted by: David A Tomasch (---.proxy.aol.com)
Date: February 13, 2002 05:21PM

Sergio, I myself have gotten completely away from using brushes and I just use an old credit card. I have the best epoxy job I have ever done. Perfectly level and no bubbles. I have given it some thought and I to will be purchasing some metal spatulas in different widths to give this a try. Who knows it will probably work even better but as far as I am concerned the old brushes are out the window. To get the epoxy along the edges of the thread and behind the top of the guide I use a toothpick. I do these areas first then I go back and hit the thread. I like to do the ends first while the epoxy is still flowing nice because when it starts to gum it is hard to get the nice edge but easy to level out on the threads with a credit card. Just some help. David A Tomasch

Options: ReplyQuote
Re: epoxy and brushes
Posted by: Thom Bonney (204.188.110.---)
Date: February 20, 2002 06:10PM

I learned to build rods a couple years ago and was taught to use a knitting kneedle to apply epoxy,little by little. I knew about brushes and figured they must be faster to apply epoxy but always wondered if there were any drawbacks,that is some excellent info Dave.
How good is that? Thank you , Thank you, one less thing to worry about!
And thanks to you Tom Kirkman for all your hard work, just wish I would have found you all sooner.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster