SPONSORS
2024 ICRBE EXPO |
Results 241 - 257 of 257
15 years ago
Richard Glabach
241. Re: Melting EVA
You might want to consider using 8 lb polyurenthane foam and pour it into the bareback mold you are making
Rick
Forum: rodboard 15 years ago
Richard Glabach
Can the Fuji Quick-Lock Recessed Cork Foregrip fit on the Aero threads? This might solve the problem of the neck being small.
Rick
Forum: rodboard 15 years ago
Richard Glabach
Scott,
that grip/ seat is a thing of beauty. Nice job, and it appears ergonomic to boot!
Rick
Forum: rodboard 15 years ago
Richard Glabach
Thanks for the replies. To clarify, the grip is not symmetric - it has a raised portion on top to accommodate the hollow of the palm, and is flat on the bottom to accomodate a plate-type reel seat.
Rick
Forum: rodboard 15 years ago
Richard Glabach
246. Poured foam grips
I have some carbon fiber tubing and a prototype handle for a rod grip. I am looking for someone willing to pour some 6 or 8 lb urethane in the shape of the prototype handle, which I shaped out of clay.
Do you have any suggestions?
Thanks,
Rick
Forum: rodboard 15 years ago
Richard Glabach
Hi all. Are there any rod building shows (albeit smaller) in the Washington DC area?
Thanks.
Forum: rodboard 15 years ago
Richard Glabach
RE: Titan Ringlock series
Please provide the heights for the following sizes of spiining guides - it was unclear to me and ring height is a key criterion
Thanks,
Rick
Forum: rodboard 15 years ago
Richard Glabach
I was fortunate to find that Schneider's Rod Shop has micro tip tops available in larger tube diameters - up to 5.5 if I remember correctly
Look under their "Hot Specials" heading
Rick
Forum: rodboard 15 years ago
Richard Glabach
Would it be a good idea to position the reel seat so the effective height of the spinning reel is reduced when using the NGC or 27x method for guide placement?
Forum: rodboard 15 years ago
Richard Glabach
251. Re: Lamiglas LSJ783
Can you describe why SCV blanks are so much better than XMG blanks? I'm still learning...
Thanks,
Rick
Forum: rodboard 15 years ago
Richard Glabach
I love the AERO Comfort Finish Spinning Seat. Ideally, I'd like to combine it with the FG25C Cork Foregrip (2-1/2" X 3/8" ID)/ HPS16N Quicklock Foregrip Nut so I can move my hand farther up the handle (the rod hand would rest both on the Aero seat and the cork-covered foregrip nut).
Does anyone know if the HPS16N fits on the threads of the AERO Comfort Finish Spinning Seat?
Any an
Forum: rodboard 15 years ago
Richard Glabach
I'm watching the thread! I find it fascinating. My main concerns are:
The 27X choke guide spacing seems to necessitate 3 guides (1 butt guide and two transition guides) PRIOR to the choke guide. Some have suggested 27X spacing may be too far out for the choke guide. If so, are there alternate ways of locating that guide closer to the reel face, apart from trial and error?
I understand line
Forum: rodboard 15 years ago
Richard Glabach
Thank you, Tom.
This forum amazes me with its thoughful topics and responsive, helpful participants.
Best to all,
Rick
Forum: rodboard 15 years ago
Richard Glabach
Tom,
I think you answered this by implication, but I wanted to be sure. The 27x distance (calculated from spool diameter):
1. Uses the top section of the spool and represents the maximum diameter of the top face?
2. Is the distance from the top spool face to its itersection with the rod?
OR
Is the distance added along the length of the rodf starting at the rod point correspondi
Forum: rodboard 15 years ago
Richard Glabach
256. Re: xmg Suggestions
All,
Mudhole still has a few LP 783s in stock - just give them a call. I purchased two today.
Happy building,
Rick
Forum: rodboard 15 years ago
Richard Glabach
Ted,
I'd love to see pictures of handles you use, if possible. Do you carve them out of cork or EVA, or are you creating carbon grips?
Forum: rodboard |