SPONSORS
2024 ICRBE EXPO |
Results 151 - 180 of 602
15 years ago
Steve Cox
153. Reel Seat
Reel seat and butt wrap on first snake skin rod.
Forum: rodboard 15 years ago
Steve Cox
154. Fangs End Piece
Inlayed fangs into Redwood butt cap. Circled with silver chain. First snake skin wrap rod.
Forum: rodboard 15 years ago
Steve Cox
155. First Snake Skin
Finally took the time and gave a snake wrap a try. Thanks so much Pat V.
Forum: rodboard 15 years ago
Steve Cox
Two very thin strips of good masking tape over the foot. Two thicker strips behind and tight.
Forum: rodboard 15 years ago
Steve Cox
157. What it is all about
G-son with a nice, healthy Farm Pond bass..... on his rod.
Forum: rodboard 15 years ago
Steve Cox
158. Masking foam rings
I covered each of the foam checker rings with two layers of light masking tape. Then put three coats a Birchwood Casey on
Forum: rodboard 15 years ago
Steve Cox
159. Tough Feather
Wet it down a little more with cp-alcohol mixture and lay bodkin on it for 30 secs.
Forum: rodboard 15 years ago
Steve Cox
160. Wrapping a Tiger
Gudebrod Black and NCP White. Wrapped under low tension. Moved it a bit already and it is showing wavy. Hackle pliers for light tension.
Forum: rodboard 16 years ago
Steve Cox
Marbled a X'mas theme on a small 'York Mint Tin' for my 4 yr old G-daughter. ( Thanks Putter)
Forum: rodboard 16 years ago
Steve Cox
TM 5 min Gel ramp. Angled the rod wrapper very sharp. Touch of super glue at the end. ( Thanks Mike Barkley)
Forum: rodboard 16 years ago
Steve Cox
5 min TM Gel shaped for ramp. Sharp angle wrap(thanks Mike Barkley)
Forum: rodboard 16 years ago
Steve Cox
Well prepped guide for this High Heel wrap is a must. For any wrap come to think of it!
Forum: rodboard 16 years ago
Steve Cox
167. High Heel wrap
This is a wrap idea I got from Rich Forhan at High Point. Looks nice with silver guides and holds up fine. Forhan lock too. Thanks Rich
Forum: rodboard 16 years ago
Steve Cox
168. Dave's feather more
These long hackles criss cross on the back side. Slow process!
Forum: rodboard 16 years ago
Steve Cox
Start of the feather wrap. Sticking it down with a bodkin and goop made from CP and denatured.
Forum: rodboard 16 years ago
Steve Cox
' Tiger Flec' the thread prior to wrapping with short,small permanent black marker strokes. Creates a random spotting on the wrap.
Forum: rodboard 17 years ago
Steve Cox
This was for their Mommtana S6ste "Cats' rod Lots of hours but I think if will functiom
Forum: rodboard 17 years ago
Steve Cox
Madeira blue with cp then two coat og Threadmaster, EWhit and silvrt trim wraps. Used a broken St Croix nd a Sage for the graphite
Forum: rodboard 17 years ago
Steve Cox
Madeira Blue with cp first. Feathered grizzly and blue with some siver tensel diamonds and single trim silver wraps. Marbled silver, blue and white. (Thanks Barkley and Putter)
Forum: rodboard 17 years ago
Steve Cox
Marbled in blue, silver and white. (Thanks Putter and Barkley) Reel is very small. For reel seat I cut down some Andy burl cork, leveled it off, fitted a plate of plastic on the top, tight wrapped it with Gudebrod and finished it with two coats of TM.
Forum: rodboard 17 years ago
Steve Cox
Built a 5'6" fly rod from old scrap blanks for a friends first baby boy. Big Montana State fans and fly fishers. Had a very small reel from Scheels and built the fly reel seat for it and marbled the split and the reel.
Forum: rodboard 17 years ago
Steve Cox
Redwood ring end piece. Carved out. # 20 Mackay Special horse hair fly and Gold Metallic thread inlaid. TM epoxy finish.
Forum: rodboard |