15 below here in upstate NY this morning without factoring in wind chill. Can't wait!!
Forum: rodboard

kil song Wrote: ------------------------------------------------------- > -EVA Half Hole Grips > -Color: Gunmetal with Black EVA > -Size: 28.5" x 13" x 28.5" > -Capacity: 24 Rods Thanks, Bob
Forum: rodboard

Any chance you have width and depth dimensions?
Forum: rodboard

Same as Scott, when I spoke with karen today. I find it best to email her. I get the quickest response that way.
Forum: rodboard

Dons tackle is a sponsor on the left side of your screen. He sells makoi thread and is located in Hawaii. I belive you can order from his website. If out of stock it will usually say so when you add to cart.
Forum: rodboard

Thanks Tom, I'll have to try one out. Bob
Forum: rodboard

Roger, If your setup doesn't have a 1/4" shaft, would the shaft on the slip clutch lock into a 3 jaw chuck? Thanks, Bob
Forum: rodboard

I choose to. It helps with adhesion and for what little time it takes I'll take the extra insurance.
Forum: rodboard

Go to the photo page at the top of the screen. You will have to register and login to the photo page also. From there you can upload photos, then copy and past the link back on this forum.
Forum: rodboard

I am a hobby builder for around 3 years now. I paint cars flat rate for a living and enjoy the change of pace when building rods for friends and family. Labor is always $.00. I enjoy building rods to donate for special organizations.
Forum: rodboard

Bingham SHX has a 9' 4wt and a 7' 6" 4wt. They are not listed on her website. Both are 4pc blanks.
Forum: rodboard

Only test will tell how easy it comes loose. Most paint strippers clean well with water. Hope this helps, Bob
Forum: rodboard

Is this what your looking for? You can pick these up at your local car dealer at the parts counter if you would rather. They are available in several sizes. Hope this helps, Bob
Forum: rodboard

Bill Thanks, that's a ton of info. Appreciate it! Thanks again, Bob
Forum: rodboard

Bill Falconer Wrote: ------------------------------------------------------- > If it were me, I'd let my wet lay up coat set > completely (24 hours) and then clean up ends / > edges and any big irregularities with a skew > chisel. Clean / true things up but remove as > little carbon fiber as possible in doing so. I'd > then apply a second coat of the same epoxy. I'd
Forum: rodboard

Call or email Karen. She now has more options than is listed on her website. Last I knew the 7'6" 4wt was still avwilable.
Forum: rodboard

I've used cottonwood bark, $30 worth should do about 3 fly rod grips. I like the look and feel. Hope this helps
Forum: rodboard

Anglers Roost on the left of your screen.
Forum: rodboard

Charles Glotfelty Wrote: ------------------------------------------------------- > Spencer your are right about that. I did find > Belize Blue was listed as a Honda color. > But wondered if someone on the site knew or knows > which color it is exactly. > In my search I came up with a honda B551P (A) as > the color. But with these color pictures it's so > hard to tell
Forum: rodboard

Charles A quick Google search suggests 2008 Honda. If you don't have an answer by Monday I can look through the books at work. We use Dupont Chrome base and I believe they can be mixed into aerosol cans. Bob
Forum: rodboard

Very nice! Is that a lemke reel seat? I like, can't wait for my 4wt to show up.
Forum: rodboard

X2. I order everything I can from Karen!!
Forum: rodboard

Lemke LC25 or LC26
Forum: rodboard

Lemke LC25 or LC26
Forum: rodboard

Marty, here is a little info. Hope it helps
Forum: rodboard

Ed, Not dumb at all. As long as the final color is achievable through seeker I like it. As far as adhesion promoter goes, if proper prep is done and using acceptable top coat none needed. Wasted time, weight and money. Flex additive evaporates out of finish as it cures. Also a wasted step. Use a quality clear coat that is designed to stay flexible, or go with a finish designed for top co
Forum: rodboard

Daniel Give Karen at Bingham Enterprises a call. There is a new blank out similar to the color of the Tiger eye blanks that she has some info on. Hope this helps Bob
Forum: rodboard

Frank, hope this helps
Forum: rodboard

+1 on the windex. Not only does it clean it helps with static electricity. Try reducing your clear , could help with the orange peel.
Forum: rodboard

Did you check Archie's? I have never dealt with him but he does gorgeous work.
Forum: rodboard