SPONSORS
2024 ICRBE EXPO |
Results 91 - 120 of 402
11 years ago
Steve Mcleod
100 x 268. Design threads: NCP white. "Lee Van Cleef done. One more to go to complete the set."
Forum: rodboard 11 years ago
Steve Mcleod
103 x 276. Design threads - ncp."My latest one which will be made in 3 seperate weaves. Starting with Clint Eastwood. I've made patterns for the other characters but will have to do them to complete the set at a later date as i am busy with other work at present."
Forum: rodboard 11 years ago
Steve Mcleod
104 x 169. 6 colours, all Madeira design threads except for the ncp white. "Oh no, not another Simpsons weave! lol. I did this one as an entry for the Nerbs dec wraps and weaves contest on facebook. Just need to apply cp and roll it to flatten out tiny gaps, will post again when i get the finish work done."
Forum: rodboard 11 years ago
Steve Mcleod
115 x 232. Madeira design threads. "A few little imperfections here and there but i'm happy with it. I still prefer the simpsons done in ncp thread to madeira though, but as this was a large pattern - madeira is smaller and fitted better."
Forum: rodboard 11 years ago
Steve Mcleod
115 x 232 all madeira design threads. "Finished this one today.It's not going to need much tightening as i kept it nice and tight throughout the weave. Just need to pack the threads to close the gaps. I will do the tie off wraps and finish work after christmas and post again when complete. Merry Christmas and happy new year to everyone on R.B.O.!"
Forum: rodboard 11 years ago
Steve Mcleod
Here i am just a little past the halfway mark. Just introduced the white threads into the pattern which is the start of the dish of doughnuts she's holding.
Forum: rodboard 11 years ago
Steve Mcleod
99. New Weave
New weave - "Sexy Marge" Yeah, i know... another simpsons weave! i hadn't planned on doing anymore, i just saw this picture and thought i'll have to make up a pattern.I usually like to do the simpsons in ncp thread as they seem to look better, but the pink thread i intended to use had deteriated - snapped easily, and i had no more, so decided to use all madeira instead, It will
Forum: rodboard 11 years ago
Steve Mcleod
New weave. 78 x 110. "got some slight gapping in this one, looked fine when the cp dried, only spotted it when i put the finish on, stands out more with a white background. Hardly noticeable though at normal viewing."
Forum: rodboard 11 years ago
Steve Mcleod
82 x 149. 6 colours, design threads - size A NCP, Wrapping thread - Gudebrod size D. " I thought for the tie off wraps - the good old red white and blue would be most fitting for this one."
Forum: rodboard 11 years ago
Steve Mcleod
74x65. Design threads - Madeira black, wrapping thread - Gudebrod NCP White. The green and black twist thread is Talbot (British thread)
Forum: rodboard 11 years ago
Steve Mcleod
Finished and ready to tighten up a bit more and pack. I'll mention the thread details when i post this one again with trim wraps and finish.
Forum: rodboard 11 years ago
Steve Mcleod
105. Tiger Wrap.
When you use cp on the top layer it dulls the pattern and you can't quite make it out as good, but it comes alive again when you apply the finish. I love doing these wraps!
Forum: rodboard 11 years ago
Steve Mcleod
107. Initals/Map Weave.
34 x 22. Quite a small weave and quick to do. My initals inside a map of Jersey (channel Islands) where i live. It's on the opposite side of the rod to where i put the bass weave so its not seen. I might put this on all my rods as a way of signing them.
Forum: rodboard 11 years ago
Steve Mcleod
108. Tiger Wrap.
This is on the rod with the bass weave and dragon scale wrap. Black and white (ncp) base wrap, Madeira Aqua - top, 1 sacrificial thread.
Forum: rodboard 11 years ago
Steve Mcleod
109. Angler/Sunset Weave.
Progression pics of latest weave.
Forum: rodboard 11 years ago
Steve Mcleod
110. Angler/Sunset Weave.
Progression Pics of latest Weave.
Forum: rodboard 11 years ago
Steve Mcleod
111. Angler/Sunset Weave.
Proression pics of latest Weave.
Forum: rodboard 11 years ago
Steve Mcleod
112. Angler/Sunset Weave.
Progression Pics of latest weave.
Forum: rodboard 11 years ago
Steve Mcleod
74 x 128. Design threads - Madeira, Wrapping thread - Gudebrod.
Forum: rodboard 11 years ago
Steve Mcleod
114. Angler/Sunset Weave.
"Tightening and packing"
Forum: rodboard 11 years ago
Steve Mcleod
115. Angler/Sunset Weave.
"This is a new one, just needs a little more packing, slight mistake on the rod (gap) but i should be able to fix that. I'll post another photo when i get the trim wraps and finish on."
Forum: rodboard 11 years ago
Steve Mcleod
116. Angler/Sunset Weave.
"This is a new one, Just needs a little more packing. Slight mistake on the rod (gap) but i should be able to fix that. I'll post another photo when i get the trim wraps and finish on."
Forum: rodboard 11 years ago
Steve Mcleod
Bass Chasing Lure Weave and Dragon Scale Wrap. All madeira threads for the weave and dragon scale, black wrapping thread - Gudebrod.
Forum: rodboard 11 years ago
Steve Mcleod
This i've incorporated with a dragon scale wrap on a factory bass rod i'm rebuilding. I've posted a sample of this weave before but it was done in size C & D design threads and size E wrapping thread, this time i've used madeira for the design threads and size D wrapping thread.
Forum: rodboard 11 years ago
Steve Mcleod
87 x 218. Design threads - orange, yellow and white size A ncp. Wrapping thread - Cobalt blue size D. "This one was made in 2009, i got the skull off a t.shirt and the flames i drew free hand. I'd like to make this one again with Madeira.
Forum: rodboard |