SPONSORS
2024 ICRBE EXPO |
Results 61 - 90 of 402
10 years ago
Steve Mcleod
New setup kindly made for me by my brother. " I made the 4 ounce thread post from one of my weave samples. I used a @#$%& magnetic tensioner for the smaller spools. The thread feed post I made up from one of my tiger wrap samples".
Forum: rodboard 10 years ago
Steve Mcleod
New setup kindly made for me by my brother. "Testing the thread carriage out. I have always wrapped and weaved with the thread coming from behind and over the top, feels strange wrapping from in front lol, but I think it will be better for weaving. I have another thread feed post if I want to wrap or weave from behind though".
Forum: rodboard 10 years ago
Steve Mcleod
New setup kindly made for me by my brother (see photo 3 for details)
Forum: rodboard 10 years ago
Steve Mcleod
New weaving setup kindly made for me by my brother. Bench - 6'x20". Plastic facia cladding was used to cover the MDF boards. Metal plating on lathe bed is "Dexion" used for cross bracing shelves. Lathe bed was routed out with a 5 mil bit for thread carriage. Wheels used on the carriage came off an up and over garage door. The chuck came off a metal lathe, two pieces of
Forum: rodboard 10 years ago
Steve Mcleod
New weaving setup kindly made for me by my brother. (see photo #3 for details)
Forum: rodboard 10 years ago
Steve Mcleod
New weaving setup kindly made for me by my brother. (see photo #3 for details)
Forum: rodboard 10 years ago
Steve Mcleod
111 design threads,265 wraps and 9 colours. "Had this one done in October but was keeping it back for December."
Forum: rodboard 9 years ago
Steve Mcleod
<p><em><strong>148 x 160. Design threads Madeira. Wrapping thread - Black coal size D. "A few imperfections and i couldn't quite get a full picture this time, but the important areas are shown, just a little of the sack that can't be seen."</strong></em></p>
Forum: rodboard 10 years ago
Steve Mcleod
102 x 267. Design threads - Madeira. "I'm a little early with this themed one but in the right month, lol."
Forum: rodboard 10 years ago
Steve Mcleod
72. Tiger Wraps
A couple of tigers I did recently on a customers Shimano rods. Bottom layer - black and white, top layer - Madeira Orange, 1 sacrificial thread. Just about to put finish on the top layer of the second one. The tiger wrap is hidden due to the cp on top which always fades it, but reappears and makes your eyes go wacky when you put the finish on lol!
Forum: rodboard 10 years ago
Steve Mcleod
73. Tiger Wraps
A couple of tigers I did recently on a customers Shimano rods. Bottom layer - black and white, Top layer - Madeira orange, 1 sacrificial thread.
Forum: rodboard 10 years ago
Steve Mcleod
74. Tiger Wraps
A couple of tigers I did recently on a customers Shimano rods. Bottom layer - black and white, Top layer - Madeira orange, 1 sacrificial thread.
Forum: rodboard 10 years ago
Steve Mcleod
91 x 124. Design threads - Madeira. "a few little imperfections on close inspection. I thought I had all the tiny gaps rolled flat but spotted some hair line cracks when I put the first coat of finish on. I Think I need new glasses.... well, that's my excuse anyway lol!"
Forum: rodboard 10 years ago
Steve Mcleod
Latest one in progress. Did the last step earlier today. loads of colour change switches on this one. Will list the thread details etc when I repost completed.
Forum: rodboard 10 years ago
Steve Mcleod
77. Bob Marley Weave
110 x 220. Design threads - Madeira white with rasta tiger wrap trim wraps. I usually prefer white ncp when doing an all white weave, but ncp on this occasion was to large for this one to fit nice.
Forum: rodboard 10 years ago
Steve Mcleod
Ringo And John - 89 x 262. Paul And George - 76 x 218. Design threads - Gudebrod NCP. Trim wraps - Madeira.
Forum: rodboard 10 years ago
Steve Mcleod
81 x 214. Design threads - Gudebrod NCP."The pattern for this weave was designed on '@#$%&' for me by an 'Aussie' Weaver friend on facebook."
Forum: rodboard 10 years ago
Steve Mcleod
81 x 214. Design threads - Gudebrod NCP. "The pattern for this weave was designed on '@#$%&' for me by an 'Aussie' weaver friend of mine on facebook."
Forum: rodboard 10 years ago
Steve Mcleod
109 x 159. Design threads - all madeira except for the lavender which was gutterman.
Forum: rodboard 10 years ago
Steve Mcleod
109 x 159. "My latest 'Simpsons' character one. Still has to be tightened and packed. 8 colours and 485 total design threads. Just got to decide on the colours for the trim bands. Will post again as usual when complete."
Forum: rodboard 10 years ago
Steve Mcleod
100 x 138. Design threads - fishhawk. Wrapping thread - Gudebrod NCP size C. "Another black and white portrait weave. Thought some regal colours and bling would be appropriate for the trim bands as it's the 'King Of Rock 'N' Roll!
Forum: rodboard 10 years ago
Steve Mcleod
110 x 162. Design threads - Fish hawk. Wrapping thread - Gudebrod NCP White.
Forum: rodboard 10 years ago
Steve Mcleod
110 x 162. Design threads - Fishhawk. Wrapping thread - ncp white size C. " Another stencil art photo that i liked and used to make up this weave Of Marilyn Monroe."
Forum: rodboard 10 years ago
Steve Mcleod
103 x 151. Design threads - fishhawk. Wrapping thread - Gudebrod NCP white size C.
Forum: rodboard 11 years ago
Steve Mcleod
103 design threads x 151 wraps. "My latest one in it's raw state. I was watching the Cagney film 'White Heat' the other day and googled some info on it when i came across a black and white stencil photo of him, thought gotta make a weave of this one. Will post again when i get the finish work done. 'Top Of The World Ma!'
Forum: rodboard 11 years ago
Steve Mcleod
97 x 196. Design threads - Gudebrod NCP except for the hair where i used a Madeira rayon thread because i did not have that colour in NCP. I wouldn't recommend using rayon thread in a weave or a dec wrap for that matter, because apart from it breaking compared to polyneon when you tighten the threads it frays and breaks easily when you pack them too. Some light hazing in the hair where i rolled a
Forum: rodboard 11 years ago
Steve Mcleod
103 x 246. Design threads - white ncp. "The final part - Eli Wallach completes this three weave set."
Forum: rodboard |