SPONSORS
2024 ICRBE EXPO |
Results 61 - 78 of 78
11 years ago
Peter Genna
61. Re: Broken Rod
Make sure you find the spine of the blank and line it up with the reel seat
Forum: rodboard 11 years ago
Peter Genna
62. eva grips
Is using sandpaper the best way to shape or lessen the outside diameter of eva grips?
Forum: rodboard 11 years ago
Peter Genna
63. rod extension
I have to repair a 2 piece rod that`s detachable butt disappeared.I want to make it a one piece rod by putting a butt extension on it. I was thinking of putting an eva rear grip on a piece of rod blank and gluing this and the top of the rod into a graphite reel seat. Will this be strong enough to handle the reel and bring in fish? The rod is a medium heavy action saltwater rod meant for bluefish
Forum: rodboard 11 years ago
Peter Genna
These particular reel seats don`t have locking nuts.,just the male and female ends
Forum: rodboard 11 years ago
Peter Genna
I have 2 friends that want their old rods dolled up but want to keep their two-pieced chrome reel seats on the polls. Even though the seats look in new condition I can`t seem to seperate them. I`ve tried WD40 and even tried heating them up with no luck. Is there any way to seperate the two halves without destroying the seat?
Forum: rodboard 12 years ago
Peter Genna
Check out Mudhole.com. You can order a catalog from them also.
Forum: rodboard 12 years ago
Peter Genna
67. eva grips
What is the best way to round off the edges of cut eva grips and the best way to ream out the hole in the grip?
Forum: rodboard 12 years ago
Peter Genna
68. Re: EVA grips
What`s the best way to ream eva grips? I`ve tried drilling through the hole with moderate success.
Forum: rodboard 12 years ago
Peter Genna
Mudhole sells Rod Skinz decals with fire being on one of them.
Forum: rodboard 12 years ago
Peter Genna
American tackle makes graphite reel seats with halographic hoods. Mudhole carries them along with other
Forum: rodboard 12 years ago
Peter Genna
Has anyone had success putting epoxy,paint,varnish or marbleization on reel seat hoods?
Forum: rodboard 12 years ago
Peter Genna
A friend of mine wants an old solid glass rod with a detachable wood butt converted to a 1 piece rod of the same length. When the rod is separated at the metal ferrule the male end only protrudes about 3 inches. Is it possible to extend the end of the rod to attach a reel seat and butt grip to it?It has to be very secure.
Forum: rodboard 12 years ago
Peter Genna
After my first coat of finish dries I feel the wraps for any "bumps". If there are any I lightly snad them to a smooth surface and then add another coat of finish.Always worked for me .
Forum: rodboard 12 years ago
Peter Genna
Try using a scotch pad abrasive to remove the epoxy. They are sold in different abrasions in Home Depot. These pads have multiple uses such as cleaning cork grips and removing scuff marks on boats.
Forum: rodboard 12 years ago
Peter Genna
Actually, I was trying to glue a dried real fish skin on the blank. The large scales prevented the skin from rolling around the blank. I used 3M spray glue as an adhesive without success. Pictures and decals are nice but I want a more natural look. Mudhole sell dried snakeskins by the inch so I thought of doing something with actual fish skins.thanks.
Forum: rodboard 12 years ago
Peter Genna
Has anyone used fish skins for buttwinds? I tried this year with porgy skins without success. I think I should`ve skaled the skin before installing.
Forum: rodboard 12 years ago
Peter Genna
Try putting a small piece of small diameter mono in the ferrule.
Forum: rodboard |