SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 25 of 25
13 years ago
Jim Little
I have used Duracoat for about 3 years...no problems. It is a paint that is used on guns. I use an air brush with a #3 tip.
Forum: rodboard 14 years ago
Jim Little
I have one of those that I built many years ago......still fishing with it. I tried to make some with solid ice rods blanks but with no success. Mine is a 6'-0 spinning rod called the "FleaFlicker"
Forum: rodboard 14 years ago
Jim Little
Spencer...you are not the only one that wishes he some of those "Flea Flickers" back.
Forum: rodboard 14 years ago
Jim Little
Correct Alex......using 12/0 treble hook.
I think Florida allows fishing for alligators with artificial lures?
Forum: rodboard 14 years ago
Jim Little
8. Alligators
Over the years I have had some unusual request for rods....but this one takes the cake. A rod for catching alligators. It will be a casting rod that is at least 8'-0 long. Any suggestions on blank and componets would be greatly appreciated.
Forum: rodboard 15 years ago
Jim Little
Try Janns Netcraft. They have some guides listed under Berkeley SS304. Just received some from them yesterday and I can't see any difference than the ones used on Carrot Stix.
Forum: rodboard 15 years ago
Jim Little
I use Gudebrod medium brown or Chestnut with no CP. Not an exact match but very close.
Forum: rodboard 16 years ago
Jim Little
I have serveral of these reel seats which I did purchase from Rick's Rods. Send me an email
Forum: rodboard 16 years ago
Jim Little
I think I have a bag of those O-rings(large). I will look tonight and let you know...if so , I can send you a replacement set free of charge.
I am looking for that little wire thingy that gives you constant tension.
Forum: rodboard 16 years ago
Jim Little
The "t" stands for thin wire. Can help with the acutal size.
Forum: rodboard 18 years ago
Jim Little
I have been using "Durocoat". It is a paint used for painting firearms. It comes in variety of colors plus high gloss clear. VERY tough paint and I do use a VL airbrush with a #3 tip.
Forum: rodboard 18 years ago
Jim Little
Don't know about Orvis's new rods but I can't find and re-wrap the old Orvis graphite rods made the in the late 70's and early 80's fast enough to meet demand, especially the 7'-6" 6wt. And I am not in a trout fishing area. Guys are using them for pan fish.
Forum: rodboard 18 years ago
Jim Little
3M tar and adhesive remover. You can get it at auto part stores.
Forum: rodboard 18 years ago
Jim Little
I also have that Delta lathe. I got a 3 jaw chuck from Penn State Industries...the screw on type for the headstock. You will need a drill chuck with a MT2 taper for the tailstock.
Forum: rodboard
Current Page: 1 of 1
|