SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 11 of 11
8 years ago
Henry La Pen
Hi all,
I am looking for a blank to fish with Jigheads and softbaits (max 20gr) but if necessary allows to manage well hardbaits of the same weight ...
I was considering those 2 blanks, any suggestions??
Thank you
Forum: rodboard 9 years ago
Henry La Pen
Hi friends,
i'm trying to bullseye the KL16h-KL8H-KL6M-KL5.5L reduction train, but i suppose something is going wrong.....
Bullseyeing the guides i have a layout like the following:
KL16H <--250mm--> KL8H <--110mm--> KL6M <--130mm--> KL5.5L
The space between the 8H and the 6M is less than the space between the 6M and the 5.5L
Is this ok or i've done something wrong?
Forum: rodboard 9 years ago
Henry La Pen
I understand that a 3000 reel isn't the best for a UL rod, but i think this isn't the problem right now.
Chuck,
I think you HAVE TO bullseye the reduction train, if you have read the Jim's post above he tells to "Bulleye the 8H and the 5.5 between the stripper and choke and test cast"
My trouble is the spacing between the guides, not the reel....
Forum: rodboard 9 years ago
Henry La Pen
Hi friends,
i'm using the spacing that Jim stated, but whe i try to bulleye the train something goes wrong.....
To bulleye the guides i have a layout like the following:
KL16H <--250mm--> KL8H <--110mm--> KL6M <--130mm--> KL5.5L
The space between the 8H and the 6M is less than the space between the 6M and the 5.5L
Is this ok or i've done something wrong????
Forum: rodboard 9 years ago
Henry La Pen
Hello,
i'm trying to place a fuji ring KL16H on a 6' UL spinning rod.
The blank is a MHX S721 and i have this ring group: KL16H, KL8H, KL6M, KL5.5L
I'll use this rod with a 3000 shimano reel
I've tried to place the stripper with the GPS software, but it places the KL16H 694mm far from the reel stem... is this ok?
Forum: rodboard 9 years ago
Henry La Pen
Thank you Bill,
I already know of 2k cans, but i have a spray gun and the 2k paint....
I was trying the squeegee method to speed up the process
Forum: rodboard 9 years ago
Henry La Pen
Hi,
i'm trying to clear coat a blank with a 2K automotive finish, but squeegee method don'work!!!
I've tryed several membranes, but no one works well
Anyone can help me???
Thank you
Henry
Forum: rodboard 9 years ago
Henry La Pen
Hello Jim,
I've read the step by step guide Anglers Resource, but I thought it was referring to Shimano reels sizes.
Daiwa sizes are larger, a Daiwa 3000 is larger than a Shimano 4000.... is about a Shimano 4500 if this would exist.
In this case is ok starting from a KL20H or should i use the KL16H, 8H, 5.5M reduction train????
Consider too that there is the possibility that on the SJ843
Forum: rodboard 9 years ago
Henry La Pen
Hy everyone
I have to build 2 rods for a friend:
The first is a Phenix Ultra UMBX-700MH, 7' 1oz that will be used with a Daiwa Certate 3000 and 15-20lbs braid;
the second is a MHX HM-SJ843, 7' 5/8oz, this one will be used with a Daiwa Caldia 2500 and 10-15lbs braid.
I'd like to build them with the KR Concept; i searched fordetails of this concept but i still have some doubts;
i was thinkin
Forum: rodboard
Current Page: 1 of 1
|