SPONSORS
2024 ICRBE EXPO |
Clear coating a blank - Squeegee method don't work!
Posted by:
Henry La Pen
(---.ip37.fastwebnet.it)
Date: October 04, 2014 06:30AM
Hi,
i'm trying to clear coat a blank with a 2K automotive finish, but squeegee method don'work!!! I've tryed several membranes, but no one works well Anyone can help me??? Thank you Henry Re: Clear coating a blank - Squeegee method don't work!
Posted by:
Tom Kirkman
(Moderator)
Date: October 04, 2014 09:43AM
The only membrane I ever found that works for that method comes from those punch balloons. They look sort of like an accordion when deflated. It's a heavier membrane than a standard balloon.
............. Re: Clear coating a blank - Squeegee method don't work!
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: October 04, 2014 01:28PM
That 2K clear also comes in a spray can If you can set up several blanks to be coated try it But once activated try to use it all or it will set in the can
A search of the net should bring it up Bill - willierods.com Re: Clear coating a blank - Squeegee method don't work!
Posted by:
Henry La Pen
(---.ip37.fastwebnet.it)
Date: October 04, 2014 03:31PM
Thank you Bill,
I already know of 2k cans, but i have a spray gun and the 2k paint.... I was trying the squeegee method to speed up the process Re: Clear coating a blank - Squeegee method don't work!
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: October 04, 2014 03:56PM
use the spray method It is a better way to put on any finish Bill - willierods.com Re: Clear coating a blank - Squeegee method don't work!
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: October 05, 2014 01:45PM
I have NO experience with this material, but I've had success getting a really good finish on carbon fiber grips by applying by hand with latex gloves on. Similar to hand rubbing a gunstock. Worth a try? Sorry, only registered users may post in this forum.
|