SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 36
17 years ago
Magnus Högberg
Tom Kirkman Wrote:
-------------------------------------------------------
> Ted,
>
> I can only guess you haven't read the article.
> Perhaps your magazine hasn't arrived yet. Be
> patient.
>
> There are no rubber rings in the finished article.
>
>
> It's fine to try and piece things together from
> message board posts, but if you want to reall
Forum: rodboard 17 years ago
Magnus Högberg
With a little help i found it on the blanks page, Stan.
Forum: rodboard 17 years ago
Magnus Högberg
Have someone built on this blank and CC'd it?
It's the new RX8 blank XF905-4 I'm interested in.
Regards,
Magnus
Forum: rodboard 18 years ago
Magnus Högberg
If you buy blanks here in Sweden, it's almost impossible to find anything but 2-5 piece blanks.
They also tend to be longer. The average spinning rod, except for UL blanks, is 8-10', whereas most rods i've seen om Mudhole etc is 6-8'.
Forum: rodboard 18 years ago
Magnus Högberg
I've searched the photo site but haven't found much so please, can you rodpainters share some pictures of your magnificent work with us newbies so we can see what it should look like.
Forum: rodboard 18 years ago
Magnus Högberg
I understad that Tom, but it would shure be nice to se some clips with the pro's in action, marbelizing, painting, casting and whatever.
I'm just jealous of your Rod Building Show. The closest i can get here in Sweden is to take the car and visit Marko in his workshop.
No offence Marko, that would be a treat. :)
Forum: rodboard 18 years ago
Magnus Högberg
Wouldn't it be nice if the seminars could be availiable on dvd shortly after the Show.
:)
Forum: rodboard 18 years ago
Magnus Högberg
Ok, thanks Tom and Stan.
Looks like i've got some experimentation ahead of me before i actually put it on "real" wraps.
Forum: rodboard 18 years ago
Magnus Högberg
I very much liked Tom Kirkmans photos of guide wraps covered with Permagloss, so I decided to have some shipped overseas.
I've read the posts about painting blanks with PG and everybody says it cures very fast.
Is there enough time to cover the wraps on a rod before it gets tacky? Take a 9' fly rod with snakes for example.
Forum: rodboard 18 years ago
Magnus Högberg
Good for you, Curtis
You should always try to endorse the local companies if possible.
Although, if you were to use European products you would have a rod you can actually fish with ;)
Forum: rodboard 18 years ago
Magnus Högberg
15. Re: How Many??
Rafael Fernandes Wrote:
-------------------------------------------------------
> how many rods you make per month? 0.25
> and how many rods you made in all life? 7
And with some basic mathematics you can see that i've built rods for 1.75 years.
I'm still stuck in the process of learning the trade so no one buy my rods, I just throw them at my frends and anyone who doesn't get a
Forum: rodboard 18 years ago
Magnus Högberg
17. Blank challenge
I find it difficult to find the spinning or casting blank I want so I thought iäll give you pro's a challenge.
See if you can help me with this.
1. Material: Eglass would be nice but graphite is ok.
2. Length: 6' or 6'6"
3. Lure weight: up to 1/2oz
4. Pieces: Minimum 2 (this should be the hard bit)
5. Price: up to $30
Give me your best shot :(
Forum: rodboard 18 years ago
Magnus Högberg
18. Re: book info
I haven't read Tom's book although i'll probably buy it pretty soon.
One book that have helped me a lot is Dale Clemens "Advanced Custom Rod Building".
Forum: rodboard 18 years ago
Magnus Högberg
Ok, i'll have to order the back issue then. By the way, wich one? :D
Forum: rodboard 18 years ago
Magnus Högberg
I'm about to perform an -for me - experiment. I want to transform a 2-piece rod into a 4-piece. I'm going to use metal ferrules.
Is this a really bad idea or should I proceed with my dirty deeds?
I'm aware that it probably will affect the action and stiffnes of the rod but since it is a backup rod it doen't bother me to much.
/Magnus - The grim reaper of blanks
Forum: rodboard 18 years ago
Magnus Högberg
Sounds great Lou. I think i'll order a couple for me and my father in law
//Magnus
Forum: rodboard 18 years ago
Magnus Högberg
22. Batson E-Glass
Any input on Batsons E-glass Spinning & Casting Rod Blanks would be appreciated. How do they feel etc. I'm lookin for short blanks that has slow or moderate action.
Forum: rodboard 18 years ago
Magnus Högberg
I hope you didn't get me wrong Tom, you are doing a magnificent job with this forum. After all it's the knowledge among the users that matters and i can't see any shortage in that department, exept for my own that is.
Forum: rodboard 18 years ago
Magnus Högberg
Thanks bill, i'll ask him.
The reason i'm asking is that hes has made a repair of his own on his favourit rod wich wont last long i believe, so i'm planning on having a rod ready for him when it breaks next time.
Forum: rodboard 18 years ago
Magnus Högberg
I'm a member of a flyfishing forum in sweden ( ) that I think is very good in this aspect.
New posts show at the top, but you can also check all new posts in all threads and areas and all new posts in threads where you have submitted a reply. The moderator can make good threads sticky so they remain at the top.
It would be great to have the same categories here as in the photo section.
This
Forum: rodboard 18 years ago
Magnus Högberg
27. Old reel seats
My father-in-law got some old casting rods (60's) with metal reelseats. The seat has some kind of quick-lock. You just press backwards on a button with the thumb, place the reel, and release the button and it slides over the rear end of the reel foot. The blank does not go through the seat, it's glued to each end.
Anyone familiar to this type of reel seat and knows where to buy one?
Found a p
Forum: rodboard 18 years ago
Magnus Högberg
29. Re: Burnt cork
Thanks for the reply Ellis. I'll see if i can find something similar to whar you recommended and have a try on a spare bit before i apply it to the real deal. Although i like when the cork looks old, the cracking up I can live without ...
Forum: rodboard 18 years ago
Magnus Högberg
30. Re: Burnt cork
Ok, thanks. I think i'll leave it as it is.
Forum: rodboard |