SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 47
8 years ago
Eliseu Cherene
Jim Ising Wrote:
-------------------------------------------------------
> I would like to know more about Fuji rod finish.
> Can you post a photo of the package or container?
Forum: rodboard 8 years ago
Eliseu Cherene
Eric MONTACLAIR Wrote:
-------------------------------------------------------
> Eliseu I notice on your videos you're using a
> small blue brush I never seen before.
> Seems to be smaller than the classic throw away
> brushes.
> Can you give me lenght and width and maybe were I
> can find some to try.
> Thanks.
This brush am I doing with nylon 0.14mm Fishing
Forum: rodboard 8 years ago
Eliseu Cherene
Chris Tulk Wrote:
-------------------------------------------------------
> Can this product be bought in the USA?
This resin bought in Japan. If you want I can give a little for testing.
Forum: rodboard 8 years ago
Eliseu Cherene
Good morning, Acquires these two resins in my visit to Japan in 2013. Since then can buy directly. I found very interesting and not use another brand. They work as follows:
Fuji resin catalyst uses 1/3 to 1 resin, as Toray uses 1/2 to 1 catalyst resin.
Details Fuji that is denser and dried in four hours. Toray is much liquid as can view the video and dried over 6 hours.
impressive finish
Forum: rodboard 8 years ago
Eliseu Cherene
13. My Bands
First I would like to apologize to colleagues because he had not seen the comments on my videos. I would like to share with colleagues and work. thanks for alarm you me.
Triple Trim Band:
Multi Trim Band:
Center Trim Band:
Double Fast Trim Band:
Forum: rodboard 8 years ago
Eliseu Cherene
I think that is wrong and translated the wrong way, I am Brazilian and I speak Portuguese, I believe it is happening some mistake.
Forum: rodboard 8 years ago
Eliseu Cherene
Sorry but the videos are my own, showing some work and does not have any audio. what was the reason to be taken exactly?
Forum: rodboard 8 years ago
Eliseu Cherene
Because my posts are being removed? Posted twice one and my video was removed.
Forum: rodboard 8 years ago
Eliseu Cherene
Thank you all for your opinions, I would like to make it clear that I own the video and did it very slowly to show a friend who wants to learn. Normally it takes 5 to 7 minutes on each side. Sorry if you do not like it, but it's the technique I use to do my work and find it easier for me.
Big hug to everyone.
Forum: rodboard 8 years ago
Eliseu Cherene
roger wilson Wrote:
-------------------------------------------------------
> Eliseu,
> I think that this method works very well.
>
> It is exactly the same method that I use to put
> trim bands on the ends of wrap. I feel much
> better to have a dozen wraps on each end of a trim
> wrap to hold it secure.
> Using this method, I have never had a trim band
&g
Forum: rodboard 8 years ago
Eliseu Cherene
What kind of rubber is used to spread the ink?
What kind of ink is this?
Forum: rodboard 8 years ago
Eliseu Cherene
21. Re: NCP Thread
as the NCP lines are manufactured? that is the question
Forum: rodboard 8 years ago
Eliseu Cherene
22. Re: NCP Thread
bill boettcher Wrote:
-------------------------------------------------------
> LINES ???
YES
Forum: rodboard 8 years ago
Eliseu Cherene
23. Re: NCP Thread
The question is to know how the NCP lines are made.
Forum: rodboard 8 years ago
Eliseu Cherene
24. Re: NCP Thread
what kind of treatment the line NOT get?
Forum: rodboard 8 years ago
Eliseu Cherene
25. NCP Thread
what kind of treatment the NCP line gets to the application of color preserver is not necessary?
Forum: rodboard 8 years ago
Eliseu Cherene
27. Flat resin
What technique you use to leave the totally flat resin?
Forum: rodboard 8 years ago
Eliseu Cherene
I made this video to illustrate with what I do Trim Double Band
Forum: rodboard 8 years ago
Eliseu Cherene
Some time ago on a trip to Japan I came across a Fuji store, where I acquired 2 Lt resin for 150USD. Brought to Brazil in use and got a good result. Combined contacted the seller and uncle brings to Brazil always going to Japan, following video with the result.
Forum: rodboard |