SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 27 of 27
7 years ago
jim barb
David, then do you use 3 top threads if you use 3 on the bottom?
Forum: rodboard 7 years ago
jim barb
Just to follow up, there are no markings at all except the oval O on the side. I believe if was a Fuji they would have put their name on it somewhere.
Thanks for posting the picture Roger.
Forum: rodboard 7 years ago
jim barb
I bought a couple of aero grip reel seats that have a flat back not tapered and it has a bid oval O on the side. Can't remember where I bought them, but they work good with the Winn grips. Does anyone know who carries these?
Forum: rodboard 7 years ago
jim barb
6. epoxy in can
Not sure if this is new or not but I work part-time at place that pours lead making jigs. We have to put a lot of weed guards in jigs so we use a lot of epoxy. We stomp on a soft drink can and use the bottom to mix our epoxy. Works great.
Forum: rodboard 8 years ago
jim barb
I use forstner bits in my drill press. Just make sure that your depth is correct. It makes for a clean hole.
Forum: rodboard 8 years ago
jim barb
Pat is use that printer. I don't build a lot of rods but I usually only build white rods and the black on clear works great.
Forum: rodboard 8 years ago
jim barb
I am looking for a lime green 3 piece set. Prefer the 3.5 rear grip too. Anyone know who is carrying them?
Forum: rodboard 8 years ago
jim barb
Thanks. I have used simple green on black grips but didn't know if it would clean up orange or yellow ones.
Forum: rodboard 8 years ago
jim barb
I'm getting ready to turn some eva out of stock. It is light colored eva. Is there some kind of coating to protect it from getting discolored with use or do you just clean it with water?
Forum: rodboard 9 years ago
jim barb
I cut off the tendon then use a forstner bit on my drill press and it comes out great to fit over two or three threads.
Forum: rodboard 9 years ago
jim barb
14. label
Does anyone where I can get a cardinal stick-on label? I'm building some rods for a High school fishing team and their mascot is the cardinal.
Forum: rodboard 9 years ago
jim barb
15. tiger wrap
I haven't tried a tiger wrap yet, but I plan on trying it. Does the primary color come from the base wrap or from the top wrap after the sacrificial wrap is removed?
Thanks
Forum: rodboard 9 years ago
jim barb
16. Re: which paint?
I take mine to a body shop near by. They paint them white with flex in the paint and clear after painting. Same as they do a car. They come out great and he charges about $7 a rod. I run a piece of mono through the rod wit a washer tied to each end so he can tie them to saw horses to paint.
Forum: rodboard 9 years ago
jim barb
I have a Stella on a 7'2" rod. The stripping guide is 18" from the center of the spool. Hope that helps a little.
Forum: rodboard 9 years ago
jim barb
These are the normal ones I've used, but the ones on the Duckett rods are about 1/2 inch long.
Forum: rodboard 9 years ago
jim barb
20. winding checks
Is there anyone that makes winding checks like on the Duckett rods? They add more color to the rod too.
Forum: rodboard 9 years ago
jim barb
21. Re: tip top
The frame is a bright metallic looking green and the shock ring is black. My running guides are 6's. I guess a 7-7 would probably work. This rod is for me. Thanks
Forum: rodboard 9 years ago
jim barb
22. Re: tip top
Sorry, I had it backward. I need it as 6 hole and 7 tube for spincasting.
Forum: rodboard 9 years ago
jim barb
23. tip top
I need a green tip top with a black insert. Not sure if some of our vendors have one or not. It needs to be a 7-6,
Thanks
Forum: rodboard 10 years ago
jim barb
Thanks for the reply. If you have cork seal on will that work as a prep? Then what is normally the protective coating after marbling. Will a spray polyurethane work?
Forum: rodboard 10 years ago
jim barb
25. majic marbling
On Mudhole's website, they show the magic marbling paint and the picture shows EVA and or cork being marbled. Is the picture wrong or can the magic marble paint be used on EVA or cork? Just curious since I haven't tried either one yet.
Forum: rodboard 10 years ago
jim barb
26. Re: eva painting
Thanks for the reply. I guess the colors are added when they mold them. Some are rather different.
Forum: rodboard 10 years ago
jim barb
27. eva painting
I'm somewhat new to rod building. Can the EVA foam handles be painted? I normally use cork up to now, but I see EVA handles with colors to buy.
Forum: rodboard
Current Page: 1 of 1
|