SPONSORS
2024 ICRBE EXPO |
CP Problems
Posted by:
Shayne Petersen
(---.dial.telus.net)
Date: January 28, 2002 02:10PM
I used Gudebond 811 CP last nite for the first time. It was very thick almost like a paste and when I applied it would seem to ball up. ( Like silicone that is half dry if you know what I mean ) Should I thin this stuff and if so with what? Or is it old or been frozen to make it act this way?? Thanks for your Help. Shayne Petersen Re: CP Problems
Posted by:
Tom Kirkman
(---.dialinx.net)
Date: January 28, 2002 03:20PM
Usually if it has been frozen it will appear almost as a solid rubber ball and not return to liquid. Thin it with isoproyl alcohol about 20 % max and see if it comes back to a thick liquid. If not - toss it and buy more. Something is wrong. ......................... Re: CP Problems
Posted by:
Dave Lockman
(65.173.2.---)
Date: January 28, 2002 05:38PM
I agree, its probably a bad bottle. I use Gudebrod and mine is a bit thicker than milk. I say grab a new bottle. Dave Sorry, only registered users may post in this forum.
|