SPONSORS
2024 ICRBE EXPO |
Scotchbrite 7448 Pads
Posted by:
Pete Cross
(---.ka.centurytel.net)
Date: January 01, 2002 01:59PM
These pads are available at www.great-atlantic1.com. Click on "Index" and select "3M Scotch Abrasive Pads". I must say it was a bear to find a site that sold them one-at-time vs. cases of them. Maybe some of you dealers could stock them and put them on your web catalog. They are typcially sold, so far as I can tell, in cases of 60 per case. 3M lists them under their ID code 61-5001-0230-8 in their automotive aftermarket category. Pete Re: Scotchbrite 7448 Pads
Posted by:
Tom Kirkman
(---.dialinx.net)
Date: January 01, 2002 02:12PM
Thanks for the information and idea. Very nice of you to pass that along. ...................... Re: Scotchbrite 7448 Pads
Posted by:
Lee Ackart
(---.proxy.aol.com)
Date: January 01, 2002 03:28PM
If you just want a small number of Scotchbrite pads, go to any automotive supply place. I found them at a NAPA store, as well as a store that specialized in automotive paints. Re: Scotchbrite 7448 Pads
Posted by:
Bruce Young
(---.proxy.aol.com)
Date: January 01, 2002 04:06PM
You can buy them at Orchard Supply Hardware. Bruce Young Landing Gear Re: Scotchbrite 7448 Pads
Posted by:
Solana
(---.salta.sinectis.com.ar)
Date: January 02, 2002 08:14AM
May I ask what is the main purpose of using this tape? What colour? THANKS ! Re: Scotchbrite 7448 Pads
Posted by:
William Colby
(---.proxy.aol.com)
Date: January 02, 2002 10:56PM
The pads are for scouring the blank in preparation for apply your epoxy. The adhesive doesn't stick well unless you lightly abrade the surface. These pads are supposed to be the best for doing that. Re: Scotchbrite 7448 Pads
Posted by:
Solana
(---.salta.sinectis.com.ar)
Date: January 02, 2002 11:24PM
So 3M it is. THANKS a lot , i had been using other "made in Tai..." tapes or so . Sorry, only registered users may post in this forum.
|