SPONSORS
2024 ICRBE EXPO |
Discontinued Blank Rumour
Posted by:
Mike Hayhurst
(---.ed.shawcable.net)
Date: October 19, 2003 08:55AM
I heard a rumour that St. Croix was discontinuing the Legend Ultra 7'6" 3wt. for 2004. Is there any truth to these rumours? Re: Discontinued Blank Rumour
Posted by:
Rich Garbowski
(69.26.69.---)
Date: October 19, 2003 11:02AM
Mike, From all indications only the 2 pc. SCIV fly blanks in all weights are to be discontinued. The travel blanks in multi piece however, will continue to be produced. This is what is aware to me, anyway. Rich Garbowski Richard's Rod & Reel Re: Discontinued Blank Rumour
Posted by:
Custom Tackle Supply
(64.53.115.---)
Date: October 19, 2003 01:02PM
I received my St. Croix Distributor program and 2004 blank catalog in the mail on Saturday. That model and several of the shorter, lower line weight models have been dis-continued. All SCIV fly blanks are either 4 pc. or new 5 pc. models. The shortest and lowest line weight is a 8'-6" 4wt. 4 pc. model. I contacted St. Croix a couple of weeks ago and that model has been sold out and will not be produced. If you can find one anywhere, you may want to snatch it up. That's the scoop. Bob McKamey -- Custom Tackle Supply Re: Discontinued Blank Rumour
Posted by:
Ray Zarychta
(---.ri.ri.cox.net)
Date: October 19, 2003 01:26PM
I got the same story from their CS department, in fact, they had shut down production and were out of stock on the 2 piece 7'6" AVID series but were supposed to start up again in Sept, I'm still waiting for two AVID fly blanks. Re: Discontinued Blank Rumour
Posted by:
Mike Naylor
(---.state.md.us)
Date: October 20, 2003 09:16AM
ALL of the Legend Ultras *as they are made now* are being discontinued. There will still be a St. Croix rod line sold under the name "Legend Ultra," but they will not be the same rods. A St. Croix representative posted this info. (on this board) a few months ago in response to a post I started- a search should turn this up. Re: Discontinued Blank Rumour
Posted by:
Mike Naylor
(---.state.md.us)
Date: October 20, 2003 12:23PM Sorry, only registered users may post in this forum.
|