SPONSORS
2024 ICRBE EXPO |
Idea for VisualWRAP users...
Posted by:
David Boyle
(---.wc.optusnet.com.au)
Date: September 10, 2003 07:09AM
Customised rod bags: You can save and print out a flat image of your cross wrap pattern using the VisualWRAP software. Why not print it out onto iron-on transfer material, then iron the transfer onto a rod bag. Would be pretty cool seeing the butt wrap on the bag as well as the rod I reckon. Just an idea... Regards David Boyle www.visualwrap.com Re: Idea for VisualWRAP users...
Posted by:
Ray Alston
(---.duda.com)
Date: September 10, 2003 08:29AM
David, Pretty neat idea, just need to remember to print it out on the special white transfer paper or some of the lighter colors won't show if its on a dark bag. I do this to apply my logo and the custom info on rod bags. If you're not familiar with iron on transfers, you probably should experiment a little as sometimes they don't come out as you think they would. Ray Re: Idea for VisualWRAP users...
Posted by:
John Britt
(---.9-67.tampabay.rr.com)
Date: September 10, 2003 10:42AM
Ray-Dave you may need to flip the material before printing or you will find your wording backwards if the logo has any words, for Daves idea it should work as a straight print. John B Sorry, only registered users may post in this forum.
|