SPONSORS
2024 ICRBE EXPO |
personalized rod tubes?
Posted by:
Bob
(---.proxy.aol.com)
Date: December 08, 2001 03:40PM
Any of the sponsers offer engraved aluminium rod tubes? Looking for fly rod tubes and want my logo on them. Re: personalized rod tubes?
Posted by:
Mike Ballard
(---.proxy.aol.com)
Date: December 08, 2001 07:20PM
I'm going to throw this out even though it is not quite what you had in mind. For the past few months I have been running some very nice labels or whatever you want to call them on my inkjet printer. It's an Epson 900 and I use the best quality coated paper and get a really, really nice label. It looks like something you would expect to have come from a professional label maker. I put my rod company name on it, the customer's name if he wishes, and the model and date. It has my logo and everything is done to look very professional. I use 3M 777 super spray adhesive to glue it to the tube lid. Then I pour some epoxy rod finish on it. If you are careful here, the finish will spread out just to the edge and still retain some depth over the label. The end result is a label under 'glass'. Very classy and something you don't see everyday. I have to credit this tip to Tom who passed it on in an email. Since I tried it I don't think I'll use anything else again. It's just really very nice and something you could consider. Be careful and experiment to see if your printer's ink is subject to smearing or running with your brand of epoxy. If it is you will have to spray the label with some type of clear artist's sealer or matte finish first. Re: personalized rod tubes?
Posted by:
Davesrods
(---.dsl.wchtks.swbell.net)
Date: December 08, 2001 10:50PM
What kind of paper are you useing?? Thanks Dave Re: personalized rod tubes?
Posted by:
Davesrods
(---.dsl.wchtks.swbell.net)
Date: December 08, 2001 10:54PM
Check out Goldenwitch rods web site.. I know REC will sell you tubes engraved.. If you are just wanting blank tubes to engrave yourself Custom Tackle has tubes, thats where I get mine.. Thanks Dave Re: personalized rod tubes?
Posted by:
Eric
(---.proxy.aol.com)
Date: December 09, 2001 04:42PM
Something I do on tubes is take the brass top to one of the engraver shops in the local mall and have the customer's monogram engraved in the top. Looks sharp and costs about $10.00. Re: personalized rod tubes?
Posted by:
Bob
(---.proxy.aol.com)
Date: December 10, 2001 08:20PM
Eric, I have been told by a few folks this is the way to go. As soon as I get time I will ck out this avenue. Thanks Sorry, only registered users may post in this forum.
|