I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Guide spacing on an 8', 7-piece fly rod
Posted by: Bill Kempey (---.dyn.optonline.net)
Date: May 02, 2024 09:14PM

I've been bit by the rod building bug, and am about to embark on building a 7-piece graphite travel rod, a 8' 3/4wt, moderate/fast blank.

I've found a few different guide spacing tables that include 8' rods; does the fact that the blank is 7 pieces impact the spacing at all, beyond just trying to stick as close as possible to the spacing suggested by the tables? I.e., if a guide ends up too close to a ferrule, shift it slightly up or down the blank as needed?

Thanks in advance for any insight!

Options: ReplyQuote
Re: Guide spacing on an 8', 7-piece fly rod
Posted by: Phil Erickson (---)
Date: May 02, 2024 09:44PM

Yes you can use the spacing, adjusting slightly to accommodate the little additional length and ferrules.

Options: ReplyQuote
Re: Guide spacing on an 8', 7-piece fly rod
Posted by: Bill Kempey (---.dyn.optonline.net)
Date: May 03, 2024 04:45PM

Phil Erickson Wrote:
-------------------------------------------------------
> Yes you can use the spacing, adjusting slightly to
> accommodate the little additional length and
> ferrules.


Cool, thanks for confirming. It seemed straightforward enough, but I'm still new enough at this that I didn't want to just assume

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster