I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Another blank ID question
Posted by: Charlie Safley (---.tingfiber.com)
Date: March 29, 2024 02:59PM

So I keep finding blanks that I bought over a decade ago at the expo. This one has the following:
22mm butt
2.9 mm tip
It's 6'11-1/2" long.
At the butt, the wall thickness is 3.25mm.
The color is black.

Most of the label is gone, but the start of the marking was "WC"

Any ideas?

Options: ReplyQuote
Re: Another blank ID question
Posted by: Tom Kirkman (Moderator)
Date: March 29, 2024 03:10PM

Do you remember which vendor you bought it from? I suspect they'd know what they brought just about any particular year.

.............

Options: ReplyQuote
Re: Another blank ID question
Posted by: Spencer Phipps (---)
Date: March 29, 2024 04:53PM

Is it a glass blank? 0.8+" butt, 7 tip, 1/8" butt wall thickness.



Edited 1 time(s). Last edit at 03/31/2024 09:44AM by Spencer Phipps.

Options: ReplyQuote
Re: Another blank ID question
Posted by: Michael Danek (---.alma.mi.frontiernet.net)
Date: March 30, 2024 07:04AM

To find out its power and strength measure its CCS numbers.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster