SPONSORS
2025 ICRBE |
Another blank ID question
Posted by:
Charlie Safley
(---.tingfiber.com)
Date: March 29, 2024 02:59PM
So I keep finding blanks that I bought over a decade ago at the expo. This one has the following:
22mm butt 2.9 mm tip It's 6'11-1/2" long. At the butt, the wall thickness is 3.25mm. The color is black. Most of the label is gone, but the start of the marking was "WC" Any ideas? Re: Another blank ID question
Posted by:
Tom Kirkman
(Moderator)
Date: March 29, 2024 03:10PM
Do you remember which vendor you bought it from? I suspect they'd know what they brought just about any particular year.
............. Re: Another blank ID question
Posted by:
Spencer Phipps
(---)
Date: March 29, 2024 04:53PM
Is it a glass blank? 0.8+" butt, 7 tip, 1/8" butt wall thickness. Edited 1 time(s). Last edit at 03/31/2024 09:44AM by Spencer Phipps. Re: Another blank ID question
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: March 30, 2024 07:04AM
To find out its power and strength measure its CCS numbers. Sorry, only registered users may post in this forum.
|