SPONSORS
2024 ICRBE EXPO |
Epoxy order for G2 uni hood sleeve
Posted by:
Jason Kraft
(---.midco.net)
Date: February 18, 2024 08:26PM
Hello,
Should I epoxy the G2 hood sleeve to the uni hood before I epoxy the reel seat to the blank or after? Thanks Jason Re: Epoxy order for G2 uni hood sleeve
Posted by:
Chris Catignani
(---)
Date: February 19, 2024 10:21AM
I would take the hood off. Install the seat. Glue the sleeve on the hood while its off and let them both cure.
Then put the cured hood back on. Re: Epoxy order for G2 uni hood sleeve
Posted by:
Jason Kraft
(---.midco.net)
Date: February 19, 2024 08:27PM
Oh my.... For some reason I totally forgot I could unthread the hood on a uni hood.
Thank you Chris for the reminder. Ha. After I read your post I thought "duh." Sorry, only registered users may post in this forum.
|