SPONSORS
2025 ICRBE |
Morris Schlesinger
Posted by:
Tom Kirkman
(Moderator)
Date: February 14, 2024 07:13AM
I realize that most people on this forum do not subscribe to the magazine and therefore did not read the news about Morris. I wanted to inform them that Morris passed away this past November. I know that many of you enjoyed his woodturning demonstrations at the Expo each year. We will certainly miss him. He was a great guy and an outstanding teacher. Morris helped make the Expo much of what it is today.
…………… Re: Morris Schlesinger
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: February 14, 2024 10:24AM
Hi Tom.
Check Test file:///F:/HPSCANS/scan.pdf Did not work Sorry folks, I tried to put a copy of the article Tom did about Morris in the Volume 27 Issue 1 of RodMaker Magazine Editors Page and in the "Rod Building News" section he penned a commentative also. I will miss Morris too. Tight Wraps & Tighter Lines. Edited 5 time(s). Last edit at 02/14/2024 11:12AM by Robert A. Guist. Re: Morris Schlesinger
Posted by:
Get Bit Outdoors.Com
(---.inf6.spectrum.com)
Date: February 14, 2024 01:30PM
He was a great guy and his willingness to share his passion was a shining example of what makes this craft so great. Tight Lines and Bull's-eyes, Get Bit Outdoors 407-542-7840 www.GetBitOutdoors.com www.facebook.com/GetBitOutdoors Re: Morris Schlesinger
Posted by:
John Lentz
(---.hfc.comcastbusiness.net)
Date: February 14, 2024 07:03PM
Sad news inded. Always looked forward to his seminars and demonstrations. They were always very informative and also very entertaiing. He was always willing to share his knowledge of his craft.
John Re: Morris Schlesinger
Posted by:
Michael Ward
(---.atlagax1.pop.starlinkisp.net)
Date: February 19, 2024 10:52AM
Will miss learning from his sessions at ICRBE..... Sorry, only registered users may post in this forum.
|