SPONSORS
2024 ICRBE EXPO |
"SeaGuide" tip help needed
Posted by:
Jernej Vrtacnik
(90.157.212.---)
Date: February 07, 2024 09:25AM
Hi all,
I need help with a selection/identification of rod tip. I have Daiwa Taimen 2.0 rod with 16mm tip that needs to be replaced. It is 2,7m 40-150g rod. I tried to find which rod tip is on the rod and I think it is Seaguide TUSLST rod tip. Can anyone help me confirm if it is right one please. As I measured the rod blank it is 2,8 mm near the tip so I think I need 16mm tip with ID 3.0mm. Can anyone suggest me where to get the tip in EU if possible. Edited 1 time(s). Last edit at 02/07/2024 10:51AM by Tom Kirkman. Re: "SeaGuide" tip help needed
Posted by:
Tom Kirkman
(Moderator)
Date: February 07, 2024 10:52AM
I would suggest contacting SeaGuide to find their list of distributors in the EU.
.......... Re: "SeaGuide" tip help needed
Posted by:
Spencer Phipps
(---)
Date: February 07, 2024 01:37PM
Have you tried Google, "Sea Guide Rod Components Europe"? Edited 1 time(s). Last edit at 02/07/2024 01:38PM by Spencer Phipps. Re: "SeaGuide" tip help needed
Posted by:
Jernej Vrtacnik
(90.157.215.---)
Date: February 12, 2024 02:38AM
Tried google and Saeguide.
The problem is that this tip is large in diamater and there is small stock. Could find it only in one place with superb shipping. Re: "SeaGuide" tip help needed
Posted by:
Mark Hahn
(---.29.18.98.static.ip.windstream.net)
Date: February 12, 2024 11:16AM
Try contacting Rick Hall, the golbal sales manager for Seaguide I have contacted him several times and he is stellar in his response. Sorry, only registered users may post in this forum.
|