SPONSORS
![]()
2023 EXPO |
Guide Placement question
Posted by:
Francis Santangelo
(---.natpool.nyu.edu)
Date: September 18, 2023 03:25PM
Using the NGC system on a build and took the diameter of the spool x 27. I placed the choke guide and reduced the reduction guides which look well spaced. The issues is the 1st reduction guide seems like it is a bit too far from the spool,
Does this mean i need to use a larger guide? Is there wiggle room on where I can move the choke? Any suggestions on what i should do to remedy? Thanks, Francis Re: Guide Placement question
Posted by:
Tom Kirkman
(Moderator)
Date: September 18, 2023 04:55PM
Moving the choke guide an inch here or there isn't likely to result in any real change. I would suggest trying a butt guide that is roughly 1/2 your spool diameter. If you can't make that work, and moving it up or back a inch or so doesn't help, then try a slightly larger guide in that position.
............. Sorry, only registered users may post in this forum.
|