SPONSORS
2024 ICRBE EXPO |
Power wrapper
Posted by:
John DeLuca
(---.res6.spectrum.com)
Date: July 27, 2023 06:08AM
By chance would anyone have a diagram of how to wire a sewing machine motor with a dial speed reducer and a foot pedal also what parts to use.Thanks all Re: Power wrapper
Posted by:
roger wilson
(---)
Date: July 27, 2023 10:50AM
John,
Here is an excellent very simple solution. 1. AC motor of your choosing. 2. A foredom foot pedal - A really excellent very long lasting electronic foot pedal. [www.amazon.com] Plug the AC motor into the foot pedal socket. Plug the Line cord for the foot pedal into the 120 volt AC wall outlet and you are good to go. Normally, this is only that one needs to do. However, if you wish, you can take a simple Triac light bulb dimmer and put that in series with the motor and you will have the extra control that you wish to have. [www.amazon.com] Good luck Re: Power wrapper
Posted by:
Mike Hubbert
(---)
Date: July 27, 2023 01:22PM
Roger is the man when it comes to this topic, he helped me built my system Re: Power wrapper
Posted by:
John DeLuca
(---.res6.spectrum.com)
Date: July 27, 2023 04:11PM
Thank you very much sounds simple enough I will post a picture when done. Sorry, only registered users may post in this forum.
|