SPONSORS
2024 ICRBE EXPO |
Lamiglas Black Salt Rod info
Posted by:
Marco Cellini
(---.51-185.alenia.it)
Date: February 15, 2023 09:29AM
Hi all, can anyone tell me which components Lamiglas used to assemble the Black Salt spinning rods?
Specifically I am referring to the BS725S rod model, I would need to know the brand and model of rings and reel seat. Thank you for your support Marco Cellini Re: Lamiglas Black Salt Rod info
Posted by:
Spencer Phipps
(---)
Date: February 15, 2023 02:46PM
The ones I had in my hands, 8 - 9 years ago, were graphite tube gripped, and had AmTack components Aero seats, or non exposed blank tube seat, deep pressed guides with zirconia rings. Sorry best I can do. Edited 2 time(s). Last edit at 02/15/2023 02:50PM by Spencer Phipps. Re: Lamiglas Black Salt Rod info
Posted by:
Spencer Phipps
(---)
Date: February 15, 2023 11:22PM
Forgot to mention, only the 8 ft., 15 - 40 lb. tarpon rod had the pipe reel seat and an eva foregrip, Edited 1 time(s). Last edit at 02/15/2023 11:23PM by Spencer Phipps. Re: Lamiglas Black Salt Rod info
Posted by:
Marco Cellini
(---.51-185.alenia.it)
Date: February 16, 2023 06:11AM
Thanks Spencer. Thank you for your support Marco Cellini Re: Lamiglas Black Salt Rod info
Posted by:
Kendall Cikanek
(---)
Date: February 16, 2023 09:01AM
Components can vary quite a bit on Lamiglas rods. I’ve got same models from similar years with different mixes of components leaning towards, but not exclusively to PacBay. It makes it appear that they shopped the bins of their local component suppliers and filled in some with Fuji. Re: Lamiglas Black Salt Rod info
Posted by:
Marco Cellini
(---.51-185.alenia.it)
Date: February 16, 2023 10:46AM
Thanks Kendall. Thank you for your support Marco Cellini Sorry, only registered users may post in this forum.
|