SPONSORS
2024 ICRBE EXPO |
New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Aleks Maslov
(Moderator)
Date: January 08, 2023 04:47PM
Dear Rodbuilding Community,
We have added a couple of new blanks into the Carbon Air/C6O2 series! More details are available here: [manage.kmail-lists.com] Best Regards, Aleks Re: New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Kerry Hansen
(---.wavecable.com)
Date: January 08, 2023 05:37PM
Is this new series un-sanded? Re: New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Spencer Phipps
(---)
Date: January 08, 2023 06:45PM
Am I looking at things wrong? Looks like the C6O2 blanks are the same weight or heavier than the same power HM blanks. Re: New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: January 08, 2023 06:52PM
Nice work, Aleks. CCS data!
And, in my opinion, the subjective action descriptors agree with the CCS numbers. I think calling ERN's in the range of 13 Medium power needs some discussion. I'm really pleased! I hope other builders will chime in to express their pleasure with having objective measures for new blanks. Edited 1 time(s). Last edit at 01/08/2023 07:21PM by Michael Danek. Re: New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Aleks Maslov
(Moderator)
Date: January 08, 2023 07:03PM
Kerry,
Sort of, it is a finish very similar to the x-ray blanks. Best, Aleks Kerry Hansen Wrote: ------------------------------------------------------- > Is this new series un-sanded? Re: New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Kerry Hansen
(---.wavecable.com)
Date: January 08, 2023 08:00PM
Aleks Maslov Wrote:
------------------------------------------------------- > Kerry, > > Sort of, it is a finish very similar to the x-ray > blanks. > > Best, > Aleks > > Kerry Hansen Wrote: > -------------------------------------------------- > ----- > > Is this new series un-sanded? Thank YOU for taking the time to answer! Re: New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Ross Montgomery
(---.ipv6.telus.net)
Date: January 09, 2023 12:36AM
I have the two long ones on order for a couple centerpin rods. Re: New Air Carbon C6O2 Salmon and Steelhead!
Posted by:
Kerry Hansen
(---.wavecable.com)
Date: May 06, 2023 09:07PM
I have finished wrapping my 9' 9" model. the fine ridges didn't cause any problems and favorite color I chose I think looks good. waiting for the CP work to be done before finishing. Wish I didn't have to lay down an epoxy patch to add some decals. The Buckeye burl that I stabilized and turned for the grip insert looks good. Looking forward to the time this summer that I can take it to the Cowlitz to try it out. Sorry, only registered users may post in this forum.
|