I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

foam grip adhesive
Posted by: John Sansevera (---.hsd1.ny.comcast.net)
Date: December 12, 2022 10:09PM

What is the best adhesive to use when laminating eva foam disks before turning them down and shaping. I want to make some custom grips by laminating some disks between sections of eva foam, and i don't want them seperating when sanding and shaping.

Fishing is not a matter of life or death, it's much more important than that

Options: ReplyQuote
Re: foam grip adhesive
Posted by: Spencer Phipps (---)
Date: December 12, 2022 11:03PM

Weldwood contact cement applied twice. EVA to cork or wood I use gel epoxy.

Options: ReplyQuote
Re: foam grip adhesive
Posted by: John DeMartini (---.inf6.spectrum.com)
Date: December 13, 2022 07:08AM

Contact cement.

Options: ReplyQuote
Re: foam grip adhesive
Posted by: Michael Danek (---.alma.mi.frontiernet.net)
Date: December 13, 2022 07:55AM

Agree with the above, make sure to follow instructions exactly and you will have success.

Options: ReplyQuote
Re: foam grip adhesive
Posted by: Mark Hahn (---.26.18.98.static.ip.windstream.net)
Date: December 13, 2022 08:09AM

Weldwood or contact cement. Michael is right, follow instructions and you should be just fine.

Options: ReplyQuote
Re: foam grip adhesive
Posted by: John Sansevera (---.hsd1.ny.comcast.net)
Date: December 13, 2022 08:37AM

guys thanks for the advice, contact cement it is.

Fishing is not a matter of life or death, it's much more important than that

Options: ReplyQuote
Re: foam grip adhesive
Posted by: roger wilson (---)
Date: December 13, 2022 09:46AM

John,
Also, please get real!!

It is nice to spend time on the water searching for an elusive quarry which most folks call fishing.

But, fishing is near the bottom of importance in having a wonderful life. Enjoy it - yes - but don't take it too extremes when there are a million things more important in life than fishing.

Have a wonderful life and love and care for those close to you.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster