SPONSORS
2024 ICRBE EXPO |
foam grip adhesive
Posted by:
John Sansevera
(---.hsd1.ny.comcast.net)
Date: December 12, 2022 10:09PM
What is the best adhesive to use when laminating eva foam disks before turning them down and shaping. I want to make some custom grips by laminating some disks between sections of eva foam, and i don't want them seperating when sanding and shaping. Fishing is not a matter of life or death, it's much more important than that Re: foam grip adhesive
Posted by:
Spencer Phipps
(---)
Date: December 12, 2022 11:03PM
Weldwood contact cement applied twice. EVA to cork or wood I use gel epoxy. Re: foam grip adhesive
Posted by:
John DeMartini
(---.inf6.spectrum.com)
Date: December 13, 2022 07:08AM
Contact cement. Re: foam grip adhesive
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: December 13, 2022 07:55AM
Agree with the above, make sure to follow instructions exactly and you will have success. Re: foam grip adhesive
Posted by:
Mark Hahn
(---.26.18.98.static.ip.windstream.net)
Date: December 13, 2022 08:09AM
Weldwood or contact cement. Michael is right, follow instructions and you should be just fine. Re: foam grip adhesive
Posted by:
John Sansevera
(---.hsd1.ny.comcast.net)
Date: December 13, 2022 08:37AM
guys thanks for the advice, contact cement it is. Fishing is not a matter of life or death, it's much more important than that Re: foam grip adhesive
Posted by:
roger wilson
(---)
Date: December 13, 2022 09:46AM
John,
Also, please get real!! It is nice to spend time on the water searching for an elusive quarry which most folks call fishing. But, fishing is near the bottom of importance in having a wonderful life. Enjoy it - yes - but don't take it too extremes when there are a million things more important in life than fishing. Have a wonderful life and love and care for those close to you. Sorry, only registered users may post in this forum.
|