SPONSORS
2024 ICRBE EXPO |
Set screw size for ALPS chuck
Posted by:
Darwin Wong
(---.sdns.net.rogers.com)
Date: September 29, 2022 08:27AM
I lost the set screw that tightens my alps rod wrapper behind the chuck. Anyone know what specific size the set screw is so I can order replacement?
Thanks! Re: Set screw size for ALPS chuck
Posted by:
Doug Scott
(---)
Date: September 29, 2022 09:11AM
Go to your local hardware store. It will be quicker and cheaper. Bring in your chuck if not too inconvenient and match it Re: Set screw size for ALPS chuck
Posted by:
roger wilson
(---)
Date: September 29, 2022 09:59AM
Darwin,
Remember, depending on the origin of the chuck, the set screw may be either metric or sae threads. So, if sae screw does not fit, check metric set screws. P.S. Which chuck are you talking about? Best wishes. Re: Set screw size for ALPS chuck
Posted by:
Darwin Wong
(---.sdns.net.rogers.com)
Date: September 29, 2022 10:34AM
Just using the one that comes in the ALPs upgraded chuck
Was hoping it was just a common thing people have already encountered. [getbitoutdoors.com] Ordered North American power one True worst case I can take the chuck out as I see how it removes now Edited 1 time(s). Last edit at 09/29/2022 10:35AM by Darwin Wong. Re: Set screw size for ALPS chuck
Posted by:
John DeMartini
(---.inf6.spectrum.com)
Date: September 29, 2022 11:20AM
The set screw in the back of my Alps chuck is metric It is.....
M5 X 0.8 5mm long Have fun John Re: Set screw size for ALPS chuck
Posted by:
Darwin Wong
(---.sdns.net.rogers.com)
Date: September 29, 2022 12:48PM
John DeMartini Wrote:
------------------------------------------------------- > The set screw in the back of my Alps chuck is > metric It is..... > > M5 X 0.8 5mm long > > Have fun > > John Thanks John! Sorry, only registered users may post in this forum.
|