SPONSORS
2024 ICRBE EXPO |
cork shaping setup
Posted by:
John Shear
(174.124.133.---)
Date: March 31, 2016 11:07PM <p>This is the setup I use for shaping my cork handles.&nbsp; I made a jig to hold the shopvac attachment where it can suck up shavings and dust as it's created.&nbsp; I like to rough shape with a Microplane rasp.&nbsp; I like drywall sanding screen instead of sandpaper.&nbsp; A simple steel rod functions as a mandrel.&nbsp; Notice I wrap tape on the end that goes in the chuck so it doesn't slide out.</p> Sorry, only registered users may post in this forum.
|