SPONSORS
2024 ICRBE EXPO |
My Sioux Stick
Posted by:
Chad Huderle
(173.17.251.---)
Date: April 02, 2010 07:35PM Last fall I unfortunately broke my original Sioux hockey themed rod. So I built this replacement, although this time it's a crappie rod, not a bass topwater rod. Stay tuned for that build, I've got a neat idea that I'm working on. This was built on a Batson RDR70L from Bill and Al at Midwest Rod and Reel. I created the reel seat with stainless skeleton reel seats surrounding an acrylic white pearl pen blank that I turned. I also turned the winding check from the same pen blank. The guides are Batson size 3 micros using the 27X method with NGC and Forhan locking wraps. The walnut split grips are from my uncles farm up near the home of the Fighting Sioux. I really wanted the graphics to look like ice so after a little trial and error I achieved the affect by using an under wrap of white thread with one light coat of CP followed by the decals and a couple coats of epoxy. The epoxy penetrated just enough to give the appearance of ice. Sorry, only registered users may post in this forum.
|