SPONSORS
2024 ICRBE EXPO |
Finishing and Drying Motor with Magnetic Slip Clutch
Posted by:
Joe Vanfossen
(71.79.184.---)
Date: January 14, 2021 03:06PM <p>Finishing and drying motor with a magnetic slip clutch. &nbsp;I used a 24V 200 RPM DC gear motor and an AC to DC power supply and 1 V to 24 V voltage regulator, a piece of stainless shaft, a coupler, a couple neodyming ring magnets and a piece of EVA as a spacer.</p> Sorry, only registered users may post in this forum.
|