SPONSORS
2024 ICRBE EXPO |
Integrated Spinning Handle with Carbon Skin
Posted by:
Bill Falconer
(207.203.39.---)
Date: April 26, 2013 02:04PM The same VSS17 handle configuration after skinning with 1.0" light carbon fiber from Capt. Mike Pedersen at Riley Rods. Seal coat of RR321 applied, followed by wet lay up with RR321. Grip then scotch brited to level and given two very light coats of RR321 to finish. The depth and luster of this method is really something and allows you to use pigments and glitter if you like. Sorry, only registered users may post in this forum.
|