SPONSORS
2024 ICRBE EXPO |
Mixing Epoxy on Coffee Mug Warmer
Posted by:
Rich Matranga
(71.128.110.---)
Date: October 23, 2006 05:03AM I recently tried mixing a batch of epoxy with the small plastic mixing cup on a coffee mug heating plate. I found the mug warmer in my rod room and decided to give it a try. The warmed epoxy mixed together perfectly with only a few very fine bubbles. The thinned, warmed epoxy did not trap large bubbles like thick epoxy is prone to. I was very pleased with the results. Sorry, only registered users may post in this forum.
|