SPONSORS
2024 ICRBE EXPO |
Mandrel set up for turning grips & seat inserts
Posted by:
Lance Dupre
(108.65.138.---)
Date: June 25, 2013 11:14AM 1/2" mandrel on an adjustable collet chuck. have a 1/2" brass bushing on the left and two 1/2" bushings on the right. The one towards the right end overlaps the mandrel by half of the bushing length. Slide your tailstock with live center up against the bushing, lock in place and tighten the tailstock until the seat or grip doesn't turn or slip on the mandrel. Sorry, only registered users may post in this forum.
|