SPONSORS
2024 ICRBE EXPO |
3 piece, 10'6'' graphite surf blank suggestions
Posted by:
David McDonough
(---.washdc.fios.verizon.net)
Date: February 10, 2022 06:20PM
Ideally, I'm looking for a graphite blank to use in the surf with a spinning reel and 30lb braided line:
10 foot 6 in long, cast 3/4 to 4 oz lures 3 piece The closest I can find is the SRF100MMF4 from RODGeeks. It looks good, but it's only 10 foot long and is 4 piece. Can anyone suggest alternatives? (I think I noticed, maybe a few years ago, a Rodbuidling.org sponsor, based in the north east of USA, that sold some 3 or 4 piece surf blanks. I can't remember their name nor recognize them in the current list of sponsors.) Thanks, David Edited 1 time(s). Last edit at 02/10/2022 06:57PM by David McDonough. Re: 3 piece, 10'6'' graphite surf blank suggestions
Posted by:
chris c nash
(---.atmc.net)
Date: February 10, 2022 08:34PM
Contact Herb L and HNL rod blanks on the sponsor list if you're interested in having a custom made blank built to your exact specs . CTS can do it all , they built me a bunch of high performance surf rods blanks with my last couple of blanks also being 10'6 in length with one being rated to handle 2- 4 1/2 ounces and the other 10'6 is rated to handle from 1/2 - 1 3/4 oz .
I went with CTS because no other surf rod manufacturer was willing to build me what I wanted . I wanted surf rods that offered extreme performance (Above and beyond ) what was offered by other manufacturers and requested very specific materials to be used and where I wanted them incorporated into the blank. CTS did not disappoint , they really do build it the blanks exactly how you request it . I had to pay design fee's for blanks that were not already offered by CTS but it was very reasonable. Sorry, only registered users may post in this forum.
|