I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2022 ICRBE
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
BatsonRainshadowALPS
BRC Rods
Banana River Rods
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
HFF Custom Rods
Janns Netcraft
Lucas Mfg Co.
Mickel's Custom Rods
My Rod Shop
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Struble Mfg.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VooDoo Rods
ZipCast

KR Concept for Baitcaster
Posted by: Josh Olney (---.twcny.res.rr.com)
Date: September 06, 2021 05:42PM

Hello All,

I'm attempting my first baitcast rod build. I'm building on NFC 7'3 X-Ray MH. I am using the Fuji Titianium torzite guides. I have the following sizes guides as I went off the Fuji KR Concept PDF sheet: (1) 10 double foot KW, (1) 5.5 double foot KW, (3) 5.5 KB, (5) 5.5 KT (1) Arowana Tip Top. My question is what should by distances be between the guides? Fuji does have a chart for baitcast builds. Any help would be greatly appreciated.

Options: ReplyQuote
Re: KR Concept for Baitcaster
Posted by: Lynn Behler (---.44.66.72.res-cmts.leh.ptd.net)
Date: September 06, 2021 06:58PM

[www.rodbuilding.org] (KW-10 is a proper replacement for an RV-6 as a butt guide)



Edited 1 time(s). Last edit at 09/06/2021 07:00PM by Lynn Behler.

Options: ReplyQuote
Re: KR Concept for Baitcaster
Posted by: David Baylor (---.res6.spectrum.com)
Date: September 06, 2021 09:06PM

Jpdj. for the butt guide, I'd look to put it 20 - 21" from the face of the reel. I just measured a rod I have built on an MB 736 X ray blank, and I have the butt guide (a KW 10) 21"from the face of the reel. The reel is a Curado 200 K. As for the rest of your guides, I can't really say as I don't use that combination of guides. I'm old school and use 3 double foot guides for the reduction train. And I only say reduction train, because they are progressively smaller guides. Something you don't really have to do on a casting rod.

Be that as it may, I use the 3 double foot guides because they carry a little extra height further down the blank, and I suspect that doing so results in using probably one less guide than I'd have to use if I used the combination that you mentioned. I can't say that for sure because I have never used any other combination of guides, but logic would seem to confirm my suspicions. Anyhow .... just for an idea of the guide spacing I have on the rod I referenced earlier, I have the second guide (a KW 8) 8 1/4" from the butt guide. I have the third guide (a KW 6) 7 1/4" from the second guide, and my fourth guide (a KB 5) 4 5/8" from the third guide. The rest I place using the 2 line static load method. My running guides are KT 5s.

I have 11 guides total plus the tip top on the rod. I used the Fuji T2 guides on my build.

And this is just me thinking out loud, but you may find you need one more running guide. It just depends on how closely you want the line to follow the curve of the blank, and if you mind the line touching the blank in between guides, or not. Personally, I don't like the line to touch the blank and I like the path of the line to match the curve of the blank pretty closely when the rod is fully loaded, so it means I may use 1 or 2 more running guides than someone else might.

Options: ReplyQuote
Re: KR Concept for Baitcaster
Posted by: Mark Talmo (---)
Date: September 07, 2021 05:40PM

Josh,
You are a better man than me = that’s an expensive guide train! Lynn, David and Norman (link) offer good solid advice. I especially like Norman’s suggestion of a spiral wrap!!!

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE.

Options: ReplyQuote
Re: KR Concept for Baitcaster
Posted by: Josh Olney (---.twcny.res.rr.com)
Date: September 08, 2021 06:09AM

Awesome. Thanks for the help and suggestions.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster