SPONSORS
2024 ICRBE EXPO |
Crooked Fighting butt problem
Posted by:
Eddie Anderson
(---.inf6.spectrum.com)
Date: August 15, 2021 09:03PM
I got my fighting butt on crooked. Used 15 minute pro past. Is there a way to get the butt off or do I cut it off and start over with a new fighting butt? Re: Crooked Fighting butt problem
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: August 15, 2021 11:15PM
You can try boiling it in water (in ziplock bag) to see if the epoxy will release. It work with reel seats. Re: Crooked Fighting butt problem
Posted by:
Bill Sidney
(---.gci.net)
Date: August 16, 2021 10:45AM
Cork is an insulator will take a long time to heat where the epoxy is an warm it up so you can remove the butt. the fastest way is to R & R it , an move on no chance to burn the blank ,
PS the epoxy on the reel seat will also get hot , don't know if I would trust the epoxy in the reel seat after it has been heated up like that , to be safe R & R it an move on , { R&R is REMOVE IT & REPLACE IT } GOOD luck on the butt removal William Sidney AK Re: Crooked Fighting butt problem
Posted by:
Eddie Anderson
(---)
Date: August 17, 2021 05:04PM
Thanks guys. Problem solved. Sorry, only registered users may post in this forum.
|