I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

DC motor
Posted by: roger wilson (---)
Date: March 04, 2021 12:13PM

A fellow rod builder's picture of his Alps Wrapper conversion from AC to DC power.

[www.rodbuilding.org]

Options: ReplyQuote
Re: DC motor
Posted by: Mark D Schulte (---)
Date: March 04, 2021 07:37PM

Roger, I'd like to thank you again. Wish I'd done this years ago. So smooth starts and stops. You went well above to help me on this.

Options: ReplyQuote
Re: DC motor
Posted by: Mark Talmo (---)
Date: March 04, 2021 11:50PM

Roger is the Wonder Wizard of electronics!!!

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE.

Options: ReplyQuote
Re: DC motor
Posted by: Tom Wewerka (---.bltmmd.fios.verizon.net)
Date: March 05, 2021 10:34AM

Mark Talmo Wrote:
-------------------------------------------------------
> Roger is the Wonder Wizard of electronics!!!


Well said Mark and he is a great contributor of information to this board.

Tom

Options: ReplyQuote
Re: DC motor
Posted by: John DeMartini (---)
Date: March 05, 2021 10:51AM

Recently Roger helped me with a project and all I can say is ; Roger was knowledgeable helpful and truly interested with what I was doing. He went out of his way to help me get my project on track.

Roger, again thanks for your help.

Have fun

John

Options: ReplyQuote
Re: DC motor
Posted by: roger wilson (---)
Date: March 05, 2021 12:36PM

Thanks much.

I just enjoy helping.

Take care

Options: ReplyQuote
Re: DC motor
Posted by: Fred Kneipp (146.86.128.---)
Date: March 12, 2021 09:38AM

Is there a dc motor available that can be used on a Renzetti wrapper?

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster