SPONSORS
2024 ICRBE EXPO |
Single Foot Boat Guides - Any Available
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: February 26, 2021 08:21AM
A while ago I had found some Fuji single foot boat guides - they were the most heavy duty single foots I had seen. I don't recall the part number, but do you guys know if anything like that is available and from who? Re: Single Foot Boat Guides - Any Available
Posted by:
Spencer Phipps
(---)
Date: February 26, 2021 10:16AM
PLDBSG? Re: Single Foot Boat Guides - Any Available
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: February 26, 2021 10:51AM
The LDB is a closed frame micro runner. Only goes up to a 6. The only thing I would consider as tough enough for a boat guide might be the KB7. You would get the benefit of a very strong, very large foot on a single foot guide. It is not referred to as a boat guide, however. Re: Single Foot Boat Guides - Any Available
Posted by:
Marc Morrone
(---.dynamic.pctc.airstreamcomm.net)
Date: February 26, 2021 01:23PM
Thank you Jim! I'll have to look at the KB7 - thinking of them for musky rods actually. Re: Single Foot Boat Guides - Any Available
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: February 27, 2021 11:48AM
The strongest single foot guide I know of is a FUJI BLBLG, but good luck trying to find them. So, I would suggest you get some BHNOG's and cut one leg off, file smooth, and doctor it up with a little black paint. Dennis J. Danku (Sayreville,NJ) Re: Single Foot Boat Guides - Any Available
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: February 27, 2021 07:37PM
I bet they still have all the tooling - I wonder if someone could special order a whole bunch of them from Fuji? Re: Single Foot Boat Guides - Any Available
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: March 01, 2021 02:43PM
Hey, Marc. I would be willing to bet that your "whole bunch" and Fuji's "whole bunch" are a few zeros apart! ;) Re: Single Foot Boat Guides - Any Available
Posted by:
Marc Morrone
(---.dynamic.pctc.airstreamcomm.net)
Date: March 04, 2021 11:26AM
Probably Jim - 1,000 probably wouldn't do it? Sorry, only registered users may post in this forum.
|