SPONSORS
2024 ICRBE EXPO |
Pac Bay / Alps Power Wrapper Track Dimenison
Posted by:
Paul Farrell
(103.104.164.---)
Date: December 29, 2020 09:53PM
Hi,
Is any one who has a Pac Bay / Alps power wrapper able to tell me the height under the thread carriage track? I'm after how high the bottom of thread carriage track sits off the table or bench. Cheers, Paul Farrell Re: Pac Bay / Alps Power Wrapper Track Dimenison
Posted by:
John Durbin
(---)
Date: December 30, 2020 10:13AM
On my Alps Power wrapper the base next to the track is 1-1/4" off of the table and the end of the thread carriage is 1-1/8" off of the table. Yes is is on a slight angle being lower away from the track. Re: Pac Bay / Alps Power Wrapper Track Dimenison
Posted by:
Paul Farrell
(103.104.164.---)
Date: December 30, 2020 08:53PM
Thanks John! Sorry, only registered users may post in this forum.
|