SPONSORS
2024 ICRBE EXPO |
Rodbuilding classes in my area?
Posted by:
Mike VanBuskirk
(---.haywd2.sfba.home.com)
Date: November 25, 2001 01:23PM
Does anyone here know if there are any rodbuilding classes in the San Francisco Bay Area? I know many of you will say that I should come to the Conclave but that isn't an option considering the distance and cost involved. I'm sure I can learn on my own from books, input from this forum, and the internet but hands-on is the way to go to learn quickly and correctly. Thanks Mike Re: Rodbuilding classes in my area?
Posted by:
Steve Emmert
(---.dsl.sntc01.pacbell.net)
Date: November 25, 2001 02:10PM
Stop by the Rod Rack (see sponsor bar) in Hayward and talk to Steve Volkers. He's been talking about classes and you can learn a lot by just watching him work. Re: Rodbuilding classes in my area?
Posted by:
Mike VanBuskirk
(---.haywd2.sfba.home.com)
Date: November 25, 2001 02:16PM
Thanks Steve. I bought my Flex Coat hand wrapper and some supplies to get started from Steve last week but I wasn't aware of him letting anyone watch him work in that back room. He always seems so busy in there with the long-range fishermen that I don't know where he gets time to teach anyone. Mike Sorry, only registered users may post in this forum.
|